Trail Gear
Showing 97–144 of 416 resultsSorted by popularity
-
Rear Bumpers
Trail Gear Rock Defense Rear Bumper (Bare) – 300411-1-KIT
- Trail Gear Rock Defense rear bumper, part number 300411-1-KIT, bare finish
- Built from 1.75 inch OD x .120 inch wall DOM tubing
- Receiver hitch included; no tire carrier
- Named for Tacoma; confirm model years before ordering
SKU: TGI300411-1-KIT -
-
-
Wheel Stud
TG Super Metal Knuckle Stud
- Trail Gear super metal knuckle stud, part number 186116-1-KIT
- Named fitment: 1979–1985 Toyota front solid axle knuckle and 1990–1997 Toyota FJ80 Landcruiser
- 0.250 in (1/4 in) longer than stock to accommodate aftermarket steering arms
- Integrated 8mm hex head; stud torque 40 ft-lbs, stud nuts 75–80 ft-lbs
SKU: TGI186116-1-KIT -
-
-
-
-
Tie Rod End
Trail Gear Rod End Kit – 186028-KIT
- Trail Gear rod end kit, part number 186028-KIT
- Shank 3/4 Inches – 16 with left hand thread and 5/8 Inches bore
- 4340 Chromoly body with zinc coating; AISI 52100 ball, hard chrome-plated
- Teflon liner, jam nut included
- Universal Fit stated, no vehicle named
SKU: TGI186028-KIT -
Rod Ends, Heim, Johnny & NG Joints
Trail Gear Rod End Kit – 186027-KIT
- Trail Gear 186027-KIT rod end kit
- 3/4 Inches – 16 right-hand thread shank with a 5/8 Inches bore
- 4340 chromoly body, AISI 52100 hard chrome-plated ball, Teflon liner
- Jam nut included
- No vehicle years or models listed; compare shank and bore before ordering
SKU: TGI186027-KIT -
Tie Rod End
Trail Gear Rod End Kit – 186026-KIT
- Trail Gear rod end kit, part number 186026-KIT
- Shank 7/8 Inches – 14 with left hand thread and 5/8 Inches bore
- 4340 Chromoly body with zinc coating; AISI 52100 ball, hard chrome-plated
- Teflon liner and jam nut included
- Universal Fit stated, no vehicle named
SKU: TGI186026-KIT -
-
-
-
-
-
-
-
-
-
-
-
License Plate Frames and Covers
Trail Gear License Plate Holder Kit – 180210-KIT
- Bolt-on license plate holder kit, part number 180210-KIT, from Trail Gear
- Designed for aftermarket front or rear bumpers
- Includes white LED light and all mounting hardware
- Clamps fit 1 1/2 inch or 1 3/4 inch O.D. tubing
- No drilling required; steel, ships raw and unpainted
SKU: TGI180210-KIT -
Tubing Clamp
Trail Gear Tube Clamps – 180129-KIT
- Trail Gear O.D. tube clamp, part number 180129-KIT
- Attaches brackets to tubing without welding
- Steel brackets can attach to aluminum suspension links and steering rods
- Manufactured from 1020 steel, clamping force up to 8,600lbs
- Universal fit, size 1.00 Inches
SKU: TGI180129-KIT -
-
-
Knuckle Pull Scale
Trail Gear Knuckle Pull Scale – 170004-KIT
- Trail Gear 170004-KIT knuckle pull scale for setting steering knuckle shims
- Checks for about 15 lb of force on the steering arm before the knuckle moves
- Universal fit shop tool, recommended when installing new knuckle bearings
SKU: TGI170004-KIT















































