Overview
The Trail Gear 180193-KIT is a set of coped tabs from Trail Gear, filed under gussets and tabs in the fabrication category. A coped tab has a notch cut along one edge so it seats against a round tube or pipe, which lets a fabricator join the tab to the tube with a closer fit. Trail Gear marks it universal fit, so it is a general fabrication part rather than one tied to a specific vehicle.
Fabricating with coped tabs
Coped tabs make fabrication easier because the notch lets the tab sit against a curved tube without gaps. A snug fit makes welding more consistent and reduces the amount of filler needed. Plan the tab location before cutting, and mark the tube so the tab lines up with the frame or bracket it supports.
Tabs can be welded or bolted depending on the design of the build. Welded joints need clean metal and full penetration, while bolted joints need holes that are square to the mounting face. Dry-fit the parts before final welding to check clearance against nearby components and wiring.
- Clean paint and rust from the tube and tab before welding
- Tack the tab in place and check alignment before finishing the weld
- Plan wiring and brake lines away from the weld area
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180193-KIT |
| UPC | 70000621432 |
Vehicle fitment
Universal fit means the tabs are not matched to any one vehicle. Measure your own mounting points before you fabricate.
What’s included
Check the tab count and hardware against your build before starting.









