Overview
The Trail Gear Rock Defense Roll Cage, part number 300152-2-KIT, is a do-it-yourself, weld-together roll cage add-on for 1987–1995 Jeep Wrangler YJ models. It attaches to the existing roll bar and replaces the stock A to B pillar braces.
The cage is made from 1.75 inch x .120 wall DOM tubing. It is designed to add roll protection compared with the stock braces during on and off pavement use, and it fits with both hard and soft tops.
Key features
- Weld-together, do-it-yourself design
- Adds to the existing roll bar
- Replaces the stock A to B pillar braces
- Made from 1.75 inch x .120 wall DOM tubing
- Fits with hard or soft tops
Welding and corrosion protection
A weld-in cage is only as good as its welds and the metal around them. Bare steel tubing carries mill scale and oil from manufacturing, and those contaminants can weaken a weld or trap moisture. Grinding clean bright metal before tacking each joint gives a sounder result and makes the finished cage easier to protect.
After fitting, coat the bare steel and every weld with a rust-inhibiting primer, then a topcoat that suits the vehicle. Check the joints where the cage meets the existing roll bar and the body, since these take the most load in a rollover. Inspect the cage periodically for cracks, especially after hard impacts.
- Grind mill scale off joints before welding
- Use a weld-through primer on bare steel
- Recoat exposed welds after installation
- Inspect joints after any hard impact
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300152-2-KIT |
| UPC | 70000638275 |
| Tubing | 1.75 inch x .120 wall DOM |
| Finish | Bare steel |
| Installation type | Weld in |
| Top compatibility | Hard or soft top |
Vehicle fitment
The manufacturer fitment list covers 1987–1995 Jeep Wrangler (YJ) models in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Later Wrangler generations, including the TJ, LJ and JK, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a weld-in kit that ships in bare steel, so it needs welding equipment and welding experience or a qualified fabrication shop. Consider a protective coating after welding, since the finish is bare steel.
What’s included
Rock Defense roll cage kit, part 300152-2-KIT. Compare the package contents with your installation plan before starting.
Not included: welding equipment and labor.












