Overview
The Trail Gear Rock Defense low profile front bumper in bare steel, part number 300366-1-KIT, is a full-width, bolt-on bumper for the 2005-2012 Toyota Tacoma. Trail Gear says its Rock Defense bumpers are made from 100% DOM tubing, 1.75 inch OD with a .120 wall.
The bumper is built from 100% DOM tubing, 1.75 inch OD with a .120 wall, and it is a full-width, low profile design. Its tubing is designed for protection on rocky terrain, and it includes a winch mount. The finish is bare steel.
Key features
- 100% DOM tubing, 1.75 inch OD with a .120 wall
- Low profile design
- Bolt-on installation
- Full-width design
- Bare steel finish
- Winch mount included
Winch and accessory planning
A front bumper is often the mounting point for a winch, lights and recovery points, so plan those items before the bumper goes on. Check the winch weight and cable routing against the bumper’s winch mount, and confirm that the fairlead sits in line with the mount. Light mounts and D-ring hardware should be chosen at the same time so spacing and wiring are worked out once. Ask yourself how often the corners meet branches or rock, and think about how the bumper sits relative to the grille and hood latch as well.
Low profile bumpers reduce the overhang at the front, which can help with approach angle but may leave less room for some accessories. Bare steel will show scratches and surface rust over time, so a touch-up or protective coating is a sensible step after installation. Inspect the bolts and mounting points after rough use, since bolt-on bumpers can loosen under repeated impacts. Keep the wiring for lights routed away from sharp edges.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300366-1-KIT |
| UPC | 70000668682 |
| Product type | Low profile front bumper, Rock Defense |
| Position | Front |
| Width | Full |
| Material | Steel, DOM tubing 1.75 inch OD with .120 wall |
| Finish | Bare |
| Winch mount | Included |
| D-ring mounts | Not included |
| Light mounts | Not included |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for 300366-1-KIT covers the 2005-2012 Toyota Tacoma, and Trail Gear’s text refers to the Tacoma.
The 1995-2004 Tacoma and the 2013 and newer Tacoma are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper is bolt-on, and the winch mount is included. D-ring mounts and light mounts are not included, so plan for those separately.
What’s included
- Rock Defense low profile front bumper in bare steel
- Winch mount
Not included: the winch, D-ring mounts and light mounts.
