Overview
The Trail Gear 186029-KIT is a high misalignment spacer with a 9/16 inch bore for heim joints and rod ends that need extra movement. Its role is to create space between the joint and its mount so the joint keeps moving freely.
The spacer’s diameter continues the ball’s spherical shape, so the ball edge can rotate into the rod end body. That geometry is built to support greater articulation, more suspension travel and longer rod end life.
Key features
- 9/16 inch bore
- Continues the ball’s spherical diameter into the rod end body
- Supports greater articulation and suspension travel
- Part number 186029-KIT, UPC 70000621681
Before you install
Heim joints and rod ends work through a limited arc, and a spacer changes where the joint sits relative to its mount. Before fitting one, check that the stud and housing keep clearance through full compression and extension of the suspension. Binding at either end of the travel often shows up first as a joint that feels stiff or makes a click under load.
Spacers are often replaced alongside the joints they support, especially when a joint has been run hard or has play in it. Inspect the mount, the bolts and the joint housing at the same time, and replace any worn component rather than reusing it with new spacing. Recheck the assembly after the first few trail runs, since fasteners can settle.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 186029-KIT |
| UPC | 70000621681 |
| Bore | 9/16 inches |
| Type | High misalignment spacer |
| Fitment | Universal fit |
Vehicle fitment
The 186029-KIT has a 9/16 inch bore, and that bore decides whether it suits a given joint rather than a particular vehicle model.
Match the 9/16 inch bore to your rod end, then confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 9/16 inch bore against the rod end before assembly. Once installed, make sure the joint does not hit the mount at the far end of its travel.
What’s included
Check the kit contents against your installation before starting.






