Select your vehicle

Trail Gear Rock Defense Rear Bumper (Bare) – 300411-1-KIT

Trail Gear

  • Trail Gear Rock Defense rear bumper, part number 300411-1-KIT, bare finish
  • Built from 1.75 inch OD x .120 inch wall DOM tubing
  • Receiver hitch included; no tire carrier
  • Named for Tacoma; confirm model years before ordering

Purchase through Amazon

Orders are placed, shipped and supported through Amazon, with Amazon’s checkout, delivery options and return policy.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

Description

Overview

The Trail Gear Rock Defense Rear Bumper (Bare), part number 300411-1-KIT, is a rear bumper for Tacoma trucks used on rocky terrain. It is built from 100% DOM tubing measuring 1.75 inch OD with a .120 inch wall. It comes in a bare finish. Confirm the Tacoma model years this bumper fits before ordering.

It mounts at the rear and is designed for rock crawling. It has a receiver hitch and no tire carrier.

Key features

  • 100% DOM tubing construction
  • 1.75 inch OD tubing with .120 inch wall thickness
  • Rear mounting position
  • Includes a receiver hitch
  • No tire carrier is included.
  • Bare finish
  • Built for rocky terrain use.

Tubing and rock crawling use

Tubing bumpers have a different feel than stamped steel, since the round section carries load along its length and can be bent or re-welded more predictably. Wall thickness and outside diameter together set how stiff the bumper is and how much it absorbs a rock strike before the mounts take the load. A bare finish leaves the metal exposed, so it needs a protective coat or regular care to hold up on rocky trails.

When choosing a tubing bumper for rock crawling, look at the mount design and the frame attachment points as much as the tube size. Check welds and bends after rocky runs, and look for scuffs that show the tube has been pushed into the frame. Keep the receiver hitch and any mounting bolts tight, and recheck them after the first few trips.

  • Check welds and bends after rocky trips
  • Coat bare tubing to slow rust
  • Recheck receiver hitch and mount bolts

Specifications

Brand Trail Gear
Product line Rock Defense
Part number 300411-1-KIT
UPC 70000656389
Position Rear
Finish Bare
Tubing material 100% DOM tubing
Tubing size 1.75 inch OD x .120 inch wall
Receiver hitch Yes
Tire carrier No
D-ring mount Confirm package contents before ordering.

Vehicle fitment

Confirm the Tacoma generation and model years before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the package contents against your installation before starting.

What’s included

Confirm whether the D-ring mount is included before ordering.

SKU: TGI300411-1-KIT Category:

Specification

Shipping weight 68.00 lbs
Package dimensions 74.00 × 33.00 × 18.00 in
brands

Questions & Answers

Will the Trail Gear Rock Defense rear bumper fit my Tacoma?

Confirm your year, model and trim before ordering. The bumper is designed for Tacoma trucks, and model years should be checked before you buy.

What tubing is used in the Rock Defense rear bumper?

The bumper is built from 100% DOM tubing with a 1.75 inch OD and a .120 inch wall thickness. That tubing is the main structural detail, and it suits rock crawling use.

Does this bumper have a receiver hitch or tire carrier?

It has a receiver hitch and no tire carrier. The bumper is a bare finish unit made for rear mounting. Plan a separate tire carrier if you need one.

Is the D-ring mount included with this bumper?

Confirm the D-ring mount is included before ordering, and plan to buy one separately if it is not in the box.

Does a bare finish tubing bumper need coating?

A bare finish leaves the steel exposed, so a protective coat helps slow rust and corrosion. Clean the tubing, dry it fully and apply a suitable coating, then inspect it after each trip where rock or mud has scraped the surface.