Select your vehicle

Trail Gear Limiting Strap Clevis Mounting Tube – 300017-KIT

Trail Gear

Shop Trail Gear Limiting Straps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 300017-KIT limiting strap clevis mounting tube
  • Weld-on design with mounting ears
  • Universal fit listed, no vehicles named
  • Part number 300017-KIT, UPC 70000667844

Description

Overview

The Trail Gear 300017-KIT is a limiting strap clevis mounting tube, a weld-on tube with mounting ears for limiting strap clevis work. It sits in the limiting strap group of suspension parts and is identified by part number 300017-KIT.

It is universal fit, so it is not tied to a particular year, make or model. The tube must still be welded where it suits your vehicle’s limiting strap layout.

Welding and mounting prep

A weld-on mounting tube should be positioned with the axle and suspension at their working heights, not with the vehicle resting on its tires. Mark the spot, check clearance through full suspension travel, and confirm the tube will not interfere with the tire, brake lines or fuel system before any metal is cut or welded.

Clean paint, rust and coatings from the weld area before fitting the tube. Heat from welding can distort thin steel, so tack the tube in place and check its alignment before completing the weld. Work should be done by a qualified welder with proper equipment, and the finished weld should be inspected for cracks.

  • Mark the mounting spot at working height
  • Clean paint and rust from the weld area
  • Check clearance through full suspension travel
  • Tack and verify alignment before final welds

Specifications

Brand Trail Gear
Part number 300017-KIT
UPC 70000667844
Type Limiting strap clevis mounting tube
Mounting method Weld-on
Mounting ears Included

Vehicle fitment

Universal fit applies, but the tube has to be welded into a mounting position that suits your vehicle’s limiting strap layout.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because this is a weld-on part, it needs a qualified welder to attach it. Plan the mounting location before cutting or welding anything, and weld only with proper equipment and training.

What’s included

The kit includes the weld-on clevis mounting tube with mounting ears.

Not included: a limiting strap and clevis are needed to complete the setup.

SKU: TGI300017-KIT Category:

Specification

Shipping weight 0.25 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

What is the Trail Gear 300017-KIT?

The Trail Gear 300017-KIT is a limiting strap clevis mounting tube with mounting ears. It carries part number 300017-KIT and UPC 70000667844, and it is a weld-on design.

Is the Trail Gear 300017-KIT a bolt-on part?

No. It is a weld-on design, so it is welded in place rather than bolted to the vehicle. Plan the mounting position before welding.

Does the Trail Gear 300017-KIT fit my vehicle?

Trail Gear lists universal fit and names no specific year, make or model. Make sure the mounting position suits your own vehicle before you weld it in.

What should be inspected on a limiting strap mount over time?

Check the weld for cracks, look for bent or elongated mounting ears, and confirm the clevis still pivots freely. Replace any part showing fatigue rather than attempting a repair.

Does a weld-on mount need corrosion protection?

Yes. Clean the weld area and apply a rust-inhibiting coating once the metal has cooled. Bare welds on exposed steel rust faster, especially where road salt collects.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Limiting Straps on Amazon