Overview
The Trail Gear 180114-KIT is an interlocking tube clamp kit for placing a support tube across a truggy or buggy. The clamps let you remove a motor, transmission or even a seat without taking the whole tube frame apart. They are machined from 100% 4130 chromoly and fastened with a countersunk allen head screw.
It is universal fit, so it is not built for one specific vehicle. Check the 1.50 inch size against your tubing before using it.
Key features
- Interlocking design lets a support tube be removed for motor, transmission or seat access
- Machined from 100% 4130 chromoly
- Countersunk allen head screw
- 1.50 inch size
Choosing a support tube setup
A support tube across a buggy or truggy frame carries load when the drivetrain or seat is in place and the chassis flexes on rough ground. Load on a support tube changes quickly over whoops and ledges, which is why a loose joint shows up as clatter or movement first. Interlocking clamps make that tube serviceable: the joint can be opened so a motor, transmission or seat comes out without disassembling the whole tube frame.
When choosing a setup, match the tube diameter and wall thickness to the clamp size before cutting anything. Mock up the layout with the components in place, because the clamp must clear the motor mounts and the roll cage bars. Keep the screw threads clean and check that the countersunk head sits flush so the clamp seats evenly. Work from a flat surface so the tube stays square.
- Check tube fit before final welding or cutting
- Recheck fastener torque after the first few runs
- Inspect the clamp faces for cracks or elongated holes
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180114-KIT |
| UPC | 70000621354 |
| Material | 100% 4130 chromoly |
| Fastener | Countersunk allen head screw |
| Size | 1.50 inches |
| Fitment | Universal fit |
Vehicle fitment
It is not matched to a make, model or year. It is designed for truggy and buggy builds.
Match tube diameter and mounting layout to your build before ordering. Match your vehicle’s year, model and trim to the build before ordering.
Installation notes
Check the joint for tightness after the first few runs, since a loose clamp can shift a load on rough ground.
What’s included
The kit is sold under part number 180114-KIT. Count the clamps and hardware against your installation plan before starting.









