Overview
The Trail Gear 186013-KIT is a kit of high misalignment spacers for rod ends with a 5/8 inch bore. The spacers continue the spherical diameter of the rod end ball, so the ball’s edge can rotate into the body of the rod end. The spacers are designed to allow greater articulation, more suspension travel and longer rod end life.
Key features
- High misalignment spacers for rod ends
- Continues the ball’s spherical diameter
- Lets the ball edge rotate into the rod end body
- Stated benefits: greater articulation, more suspension travel and longer rod end life
Setting up for more articulation
A high misalignment spacer changes how far the ball can rotate inside the rod end body. Because the spacer continues the ball’s spherical diameter, the ball’s edge sits closer to the housing wall, which is what allows the extra movement. The trade-off is that the joint has less of a stop, so the link angle should be checked through its full travel.
Before installing, confirm the rod end is worth upgrading. Spacers help most when the joint is already binding, but they do not fix worn ends or a link set at a poor angle. Inspect the ball for scoring, check the threads, and make sure the jam nut and locking hardware are tight after setup. Recheck the joint after the first few trips and whenever the suspension height changes.
- Confirm the rod end bore is 5/8 inch
- Check link angle through full travel
- Inspect the ball and threads for wear
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 186013-KIT |
| UPC | 70000621673 |
| Bore | 5/8 inches |
| Type | High misalignment spacers |
Vehicle fitment
No vehicle is named for this kit, and no year or model is given. Universal fit is stated, yet the bore is the main sizing point, so match the 5/8 inch bore to your rod end.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









