Overview
The Trail Gear 186021-KIT is a rod end kit with a right hand thread, a 1-1/4 Inches – 12 shank and a 7/8 Inches bore. It is universal fit, so it is not tied to one vehicle. Check the shank and bore against the arm or link you are fitting.
The main body is 100% 4340 Chromoly with a zinc coating. The ball is AISI 52100 steel with a hard chrome plated finish and runs in a Teflon liner. The kit comes with its jam nut.
Key features
- 100% 4340 Chromoly body with zinc coating
- AISI 52100 ball, hard chrome plated
- Teflon liner
- Jam nut included
- Right hand thread
Kit contents and setup
A rod end kit like this combines the threaded body, the ball and the liner into one assembly, so the parts are chosen to work together. The ball rotates within the liner to allow the arm to move, while the jam nut locks the setting once the length is right. Before assembly, test-fit the shank in the link and confirm the bore lines up.
When rebuilding a link, consider replacing the jam nut and any worn bolts at the same time, since they carry the same load. Keep the threads clean and free of grit, and check the body and ball for cracks or roughness before reinstalling. A kit like this is often swapped in as a whole, so inspect the matching end on the other side as well.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 186021-KIT |
| UPC | 70000621638 |
| Shank | 1-1/4 Inches – 12 |
| Bore | 7/8 Inches |
| Thread direction | Right Hand |
| Body | 100% 4340 Chromoly, zinc coated |
| Ball | AISI 52100, hard chrome plated |
| Liner | Teflon |
| Fitment | Universal Fit |
Vehicle fitment
This kit is universal fit and is not built for a specific vehicle. Match the 1-1/4 Inches – 12 shank and 7/8 Inches bore to the arm or link you are replacing or building.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The rod end kit comes with a jam nut.









