Overview
The Trail Gear 186022-KIT is the left hand thread version of the rod end kit, with a 1-1/4 Inches – 12 shank and a 7/8 Inches bore. It is universal fit, so compare the shank and bore to your own arm or link.
Its body is 4340 Chromoly with a zinc coating, the ball is hard chrome plated AISI 52100, and a Teflon liner sits inside. A jam nut comes with the kit.
Key features
- Left hand thread
- 4340 Chromoly body, zinc coated
- Hard chrome plated AISI 52100 ball
- Teflon liner
- Jam nut included
Left hand and right hand pairs
Left hand and right hand threads are used in pairs on many links so that turning the body adjusts length in opposite directions on each side. Using two ends of the same direction can make it impossible to set the link correctly. Before ordering, mark which side each end goes on and confirm the thread direction of the existing parts.
The thread direction is often the first thing to check when a link has been rebuilt by someone else. Inspect the threads for damage and clean them before assembly, since grit can prevent a jam nut from seating. Keep the liner and ball lubricated where the design allows, and inspect them after rough use for wear and play.
- Mark each end as left or right before removing it
- Check that both ends use the same shank size
- Replace the jam nut if its threads are worn
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 186022-KIT |
| UPC | 70000621639 |
| Shank | 1-1/4 Inches – 12 |
| Bore | 7/8 Inches |
| Thread direction | Left Hand |
| Body | 4340 Chromoly, zinc coated |
| Ball | AISI 52100, hard chrome plated |
| Liner | Teflon |
| Fitment | Universal Fit |
Vehicle fitment
This kit is universal fit and is not built for one make, model or year. Check that the left hand thread matches the other end of your assembly before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rod end kit with jam nut, left hand thread.








