Overview
The Trail Gear 186008-KIT is a set of high misalignment spacers with a 3/4 inch bore for rod ends that need extra articulation. Spacers like these sit between the rod end and its mount, giving the joint room to swing.
The spacer carries the ball’s spherical diameter into the rod end body, so the edge of the ball can rotate inward. This adds articulation and suspension travel, and the design is aimed at longer rod end life.
Key features
- 3/4 inch bore
- Carries the ball’s spherical diameter into the rod end body
- Adds articulation and suspension travel, per the manufacturer
- Aimed at longer rod end life
- Part number 186008-KIT, UPC 70000621676
Clearance and rod end choice
Spacers change how a rod end sits in its mount, so the joint can rotate further before the ball edge contacts the housing. That extra rotation helps when a joint needs more articulation, but it also means the joint moves into positions the original mount did not allow. Look at the full arc of the joint, including how it lines up with the bracket and nearby hardware.
Choose a spacer that fits the rod end body and mount without leaving slop. Consider whether related parts such as the bracket, bolt, and jam nut also need replacing when the joint is upgraded. Check the joint after each trail trip for heat, scrubbing, and play, since those signs show the new range of motion needs attention.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 186008-KIT |
| UPC | 70000621676 |
| Bore | 3/4 inches |
| Type | High misalignment spacer |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, so the 3/4 inch bore and rod end size decide whether it works on your joint. Match fit to your year, model and trim before ordering.
Compare the 3/4 inch bore to your rod end before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the spacer increases how far the joint can rotate, check clearance to the mount and surrounding parts once it is in place.
What’s included
Check the individual pieces against your installation before starting, since the package contents should be confirmed.









