Overview
The Trail Gear TG Winch Puck, part number 180352-KIT, is a winch puck from Trail Gear sold as a kit. It is universal fit, so it is not tied to specific years, makes or models.
Mounting a winch puck
A winch puck is a plate that spreads the load of a winch across a mounting surface, so the surface and fasteners both need to be sound. Before fitting one, clean the mounting area and check for cracks, rust or flex that could let the puck shift under load. Make sure the winch’s bolt pattern lines up with the puck’s holes before you tighten anything.
Pucks are typically chosen to suit the winch’s base and the vehicle’s bumper or frame, so compatibility depends on both. Check that the puck does not interfere with fairleads, lights or nearby hoses, and confirm the winch cable will run straight through the opening. After rough runs, re-check the bolts and look for signs of wear around the holes.
- Clean the surface before installing
- Check bolt pattern against winch base
- Inspect holes for wear after trail use
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180352-KIT |
| UPC | 70000625527 |
| Fitment | Universal fit |
Vehicle fitment
This kit is universal fit, so compare the puck with your winch and mounting setup before buying. Confirm it suits your winch and vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.









