Overview
The Trail Gear 1.25 in tube clamp, kit 180128-KIT, is a two-half 1020 steel clamp for mounting suspension and steering brackets onto tubing without welding. The short copy lists zinc plated screws and two clamp halves in the kit.
The clamp is designed for situations where a bracket must be adjusted or removed later. It suits aluminum suspension links and steering rods that cannot take welded steel brackets, and it provides a clamping force of up to 8,600 lb. It is sold individually and fits 1.25 inch tubing as a universal fit.
Key features
- Two clamp halves with zinc plated screws
- 1020 steel construction
- 1.25 inch size
- Clamping force up to 8,600 lb.
- Lets steel brackets attach to aluminum links and rods without welding
Tube clamp basics
A tube clamp holds a bracket to round tubing by tightening two halves around the tube, so the bracket can be moved or taken off later without cutting or welding. That makes it useful on aluminum links and steering rods, where heat from welding can weaken the metal or change its finish. Clamps like this work by friction, so the tube surface and the clamp bore both need to be clean and free of paint, grease and loose scale before assembly.
Check the clamp after the first few drives. Vibration can loosen the screws, and the tube can settle slightly under load. Retighten the screws evenly, alternating between them, and look for any movement of the bracket on the tube. Replace a clamp that shows cracks, deep gouges or a bore that no longer grips the tube.
- Confirm the tube is round and free of dents at the clamp location
- Use a bracket rated for the loads on that link or rod
- Keep the bracket clear of moving parts and exhaust heat
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180128-KIT |
| UPC | 70000621428 |
| Tube size | 1.25 in |
| Material | 1020 steel |
| Clamping force | Up to 8,600 lb |
| Hardware | Zinc plated screws |
| Pieces | 2 clamp halves |
Vehicle fitment
It is a universal fit at 1.25 inches, so it is not made for a particular vehicle. Match it to your tube diameter and bracket.
No vehicle years, makes or models are given for this clamp, so confirm the tube size before ordering.
What’s included
The short copy lists two clamp halves and zinc plated screws.
Not included: Plan to supply your own mounting bracket, and check the package contents against your installation before starting.









