Overview
The Trail Gear 180188-KIT is a 3/4 inch-16 right hand tube end for welding into a custom build, designed for Heim and Johnny Joints. Being a tube end, it welds to steel tubing with a minimum 1-1/4 inch inside diameter.
A tube end is the threaded piece welded to a tube so that a joint can be fitted and locked in place. Confirm the steel grade, length and wall thickness against your build.
Key features
- Right hand thread direction, 3/4 inch-16
- Designed for Heim and Johnny Joints
- Weld-in tube end for custom builds
- Requires tubing with a minimum 1-1/4 inch inside diameter
Tube end use and tubing
A tube end sets the connection at the end of a custom steering or suspension link. Because it welds to tubing, the steel grade and wall thickness of the tube matter as much as the end itself. Choose tubing that suits the loads your build will see, and cut it square before fitting the end so the weld has an even gap.
Check the thread direction against the joint before welding, since right hand and left hand parts will not mate. After welding, inspect the joint, the threads and the tube for cracks, bending or thread damage. Retire a tube end that shows cracking near the weld, and replace it with a new end rather than reheating the old one.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180188-KIT |
| UPC | 70000621762 |
| Thread size | 3/4 Inches – 16 |
| Thread direction | Right hand |
| Minimum tube ID | 1-1/4 Inches |
| Jam nut | Not included |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named, and the tube end is marked universal fit. It is a build component, so its use depends on the joints and tubing you choose.
Check the thread direction against your joint, since this tube end is right hand. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Weld the tube end only to tubing that meets the 1-1/4 inch minimum inside diameter, and check that the joint’s thread matches before assembly.
What’s included
One tube end, part number 180188-KIT.
Not included: Heim or Johnny Joints and jam nut. Check the package contents against your installation before starting.







