Select your vehicle

Trail Gear Rod End Kit – 186023-KIT

Trail Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 186023-KIT rod end kit with jam nut
  • 5/8 inch bore and right hand thread
  • Body of 100% 4340 chromoly with zinc coating
  • Shank size to be measured from the existing joint

Description

Overview

The Trail Gear 186023-KIT is a rod end kit with a 5/8 inch bore and a right hand thread. Rod ends, also called heim joints, connect links in steering and suspension and allow angular movement. The body is 100% 4340 chromoly with a zinc finish, and the ball is AISI 52100 material with a hard chrome plating. Trail Gear marks it universal fit, and the jam nut comes with it.

Key features

  • Body of 100% 4340 chromoly with zinc coating
  • AISI 52100 ball, hard chrome-plated
  • Teflon liner
  • Jam nut included
  • Right hand thread direction

Measuring before you buy

A rod end’s shank and bore are the dimensions that decide whether a replacement fits, so measure before ordering. Take the bore across the eye and the thread length on the old joint, and note whether the thread runs right hand. Matching these points matters more than matching the vehicle name, since a universal fit part still needs the right geometry.

Before pulling the old joint, mark the link length so the new one can be set close to the original. Count the turns on the threads so the jam nut ends in the same place, which keeps the alignment near what it was. Keep a spare jam nut on hand if the old one is damaged, and check the joint for play after the first drive.

  • Measure the shank and bore of the old joint
  • Note link length and thread direction before removal
  • Check for play after the first few drives

Specifications

Brand Trail Gear
Part number 186023-KIT
UPC 70000621641
Body material 100% 4340 Chromoly
Body finish Zinc coating
Ball material AISI 52100, hard chrome-plated
Liner Teflon
Bore 5/8 inch
Thread direction Right hand

Vehicle fitment

This rod end is not vehicle-specific, and it carries universal fit with no year, make or model. Measure the existing joint’s shank before choosing this kit.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Match the bore and thread direction to the joint being replaced, then set the jam nut once the link length is correct.

What’s included

The kit comes with the rod end and the jam nut.

SKU: TGI186023-KIT Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

What is the Trail Gear 186023-KIT?

It is a rod end kit from Trail Gear, part number 186023-KIT, with a 5/8 inch bore, a right hand thread and a jam nut. The body is 100% 4340 chromoly with a zinc finish.

What shank size does it have?

Measure the threaded end of the joint you are replacing before ordering, since the kit's shank size needs to match it.

Does it fit my Jeep?

No year, make or model is named. Trail Gear marks it universal fit, so confirm the bore, thread direction and shank against your existing link before fitting the kit.

How do I know if my rod end needs replacing?

Look for play at the ball, a rough or sticky feel when you move the link, and cracks or distortion in the body. Replace the joint if the play returns after the jam nut is set correctly. Worn joints can affect alignment and handling.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon