Trail Gear
Showing 49–96 of 416 resultsSorted by popularity
-
-
-
Suspension Control Arm Link
Trail Gear 9/16″ Creeper Joint Kit – 303893-KIT
- 9/16 inch weld-on creeper joint kit for building suspension components
- Inner flex ball of 8620 tool steel
- Polyurethane bushings and hardened steel washers
- Provided unassembled; welding required
- Part number TGI303893-KIT
SKU: TGI303893-KIT -
Leaf Spring Shackle Kit
Trail Gear 5″ Greasable Shackle Plate – 111311-1-KIT
- 5 inch greasable shackle plate for 1979-1995 Toyota pickups and 1984-1995 4Runners
- Threaded zerk fittings and 18 mm factory size bolts with crimp nuts
- Polly bushings included
- Zinc plated plates
- Part number 111311-1-KIT from Trail Gear
SKU: TGI111311-1-KIT -
Leaf Spring
Trail Gear 3″ Rear Lift Super Flex Leaf Springs – 110016-1-KIT
- Rear 3 inch lift leaf springs as a pair with polyurethane bushings
- Fits 1979–1995 Toyota Pickup and 1985–1995 4Runner
- Fits 1995–2004 Toyota Tacoma
- Spring rate 235 lbs per inch, seven leaves plus a torque leaf
SKU: TGI110016-1-KIT -
-
-
Suspension Control Arm Link
Trail Gear 1.25 Inch Creeper Joint – 110766-KIT
- Weld-on 1.25 inch creeper joint kit for building suspension links
- Forged outer shell with 8620 tool steel flex ball
- Polyurethane bushings and hardened steel washers
- Up to 40 degrees of movement when used with spacers
- Part number TGI110766-KIT
SKU: TGI110766-KIT -
Suspension Control Arm Link
Trail Gear 1 Inch Creeper Joint – 110771-KIT
- Forged 1 inch creeper joint for suspension links and rod ends
- Forged outer shell with an 8620 tool steel flex ball
- Polyurethane bushings and hardened steel washers
- Up to 40 degrees of movement when used with spacers
- Threaded grease fitting and jam nut included
- Part number TGI110771-KIT
SKU: TGI110771-KIT -
Hose End Fittings
High Pressure Power Steering Fitting
- Trail Gear #6 JIC female high pressure power steering fitting, part 304055
- Zinc-plated steel construction
- Fits a #6 high pressure power steering hose
- Screw-on installation with no crimping, in straight, 45 degree and 90 degree versions
SKU: TGI304055 -
Power Steering Hose
Power Steering Hose Kit
- #6 SAE 100R5 and SAE J1402 high pressure power steering hose
- Rated 2250 psi working pressure, 9000 psi minimum burst
- Temperature range -40°F to +275°F
- Black oil-resistant NBR rubber with steel wire reinforcement
- Part number 304054 (Trail Gear)
SKU: TGI304054 -
Winch Cable and Synthetic Rope
DuraLine™ ExoSheild Winch Line
- DuraLine ExoShield winch line with a 3/8-inch Dyneema SK75 core and 18,000 lbs breaking strength
- Black Dyneema over-wrap against rock and debris abrasion
- Red Kevlar over-wrap on the last 12 feet to resist winch drum heat
- Stainless steel thimble, G80 Heavy Duty Hook and rope guard included
- Part number 303949, universal fit
SKU: TGI303949 -
-
Wheel Bearing Kit
Rear Wheel Bearing Kit
- Trail Gear 303901-3-KIT rear wheel bearing kit, one side of the rear axle
- Koyo brand bearings with integral spacer and ground bearing retainer
- Rear axle wheel seal and printed instructions included
- Suzuki Samurai; model years not identified
SKU: TGI303901-3-KIT -
-
-
Winch Fairlead
Trail Gear Bolt-On Fairlead Mount (Bare Steel) – 303384-2-KIT
- Trail Gear 303384-2-KIT bolt-on fairlead mount in bare steel
- Universal design for most bumpers; works with hawse or roller fairleads
- Pre-drilled for most 5000-9500 model low-profile winches
- Includes 3/8 inch-16 and M10-1.5 extended winch mount hardware
SKU: TGI303384-2-KIT -
-
Drive Shaft Spacer
Trail Gear Longfield Driveline Spacer – 301697-1-KIT
- Trail Gear driveline spacer kit for a driveshaft that is too short after a lift
- 1 inch and 1.5 inch spacer sizes, with bolts
- Part number 301697-1-KIT, UPC 700006929981
- Universal fit; year, model and trim to be confirmed
SKU: TGI301697-1-KIT -
-
-
Hydraulic Steering Assist
Trail Gear Full Hydro Steering Ram Kit 8 Inch – 301392-KIT
- Trail Gear full hydraulic steering kit, part 301392-KIT, for Toyota pickups and 4Runners
- Fits 1988-1995 Toyota 4Runner and Toyota Pickup models
- Includes pump, 6-inch, 8-inch or 10-inch double ended ram, orbital and hoses
- Pump rated 4.5 GPM and 1650 PSI
SKU: TGI301392-KIT -
Battery & Battery Accessories
Trail Gear Diehard/Odyssey Battery Box (Bare Steel) – 301347-KIT
- Battery box for Diehard Platinum and Odyssey DT 34/78 size batteries
- 1/8 inch thick steel, shipped unpainted in bare steel finish
- Welded or bolted mounting with 9 holes in the bottom
- Top lifts off after removing three bolts
- Part number 301347-KIT
SKU: TGI301347-KIT -
-
-
-
-
-
-
-
-
Hydraulic Steering Assist
Trail Gear Hydraulic Steering Kit – 300679-KIT
- Trail Gear steering ram mounting brackets, part number 300679-KIT
- Formed from heavy-duty 1/4 in. plate steel
- Designed for the Rock Assault steering ram kit
- About one hour to install once the steering box is tapped
SKU: TGI300679-KIT -
-
-
-
-















































