Overview
The Trail Gear Interlocking Tube Clamp kit, part number 180112-KIT, is a 1.75 in clamp for a support tube across a truggy or buggy. It is machined from 100% 4130 chromoly.
The design lets you remove a motor, transmission or seat while the support tube stays in place. It is a universal fit clamp, with no vehicle years, makes or models named.
Key features
- Machined from 100% 4130 chromoly
- 1.75 in size
- Counter sunk Allen head screw
- Flexibility to remove a motor, transmission or seat
Choosing a clamp size
The clamp size has to match the support tube it grips, so measuring the tube is the first job. A clamp that is too loose will slip under load, and one forced onto a tube can deform the wall. Measure the outside diameter at the spot where the clamp will sit, not just the tube as a whole.
Interlocking clamps are useful on builds you service often, because the tube can be separated without taking the whole frame apart. Use anti-seize on the screw threads if you expect to remove them regularly, and keep track of which clamp goes where so the fit stays correct. Retighten after the first outing and after any major trail hit.
- Measure the tube at the clamp position
- Plan for seat and motor removal access
- Use anti-seize on frequently removed screws
- Recheck tightness after the first run
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 180112-KIT |
| UPC | 70000621356 |
| Material | 100% 4130 chromoly |
| Size | 1.75 in |
| Fastener | Counter sunk Allen head screw |
Vehicle fitment
This clamp is universal fit, not vehicle-specific. No year, make or model is named, so fit comes down to the tube diameter and frame layout of your buggy or truggy.
The clamp has no vehicle fitment stated. Measure your tube before ordering.
Installation notes
Fastening is by a counter sunk Allen head screw, so an Allen key is the tool to have ready.
What’s included
Confirm the kit contents against your build plan before installation, including the number of clamps and fasteners.









