Overview
The Trail Gear 186027-KIT is a rod end kit with a 3/4 Inches – 16 right-hand thread shank and a 5/8 Inches bore, a threaded joint for linkage. Trail Gear builds the body from 4340 chromoly with a zinc coating, and the ball is AISI 52100 steel with a hard chrome plating for a tough finish.
The liner is Teflon, and a jam nut is supplied to lock the threaded shank in place. Trail Gear labels the part Universal Fit, but it is sized by its shank and bore, so compare those dimensions first.
Key features
- 4340 chromoly body with a zinc coating
- AISI 52100 ball with hard chrome plating
- Teflon liner
- Right-hand thread on a 3/4 Inches – 16 shank
- 5/8 Inches bore
- Jam nut supplied
Rod end maintenance
A rod end works through a fixed arc, so its ball and liner carry the load on every movement of the link. The liner is the wear surface, so it usually shows up as play or a notchy feel before the ball itself fails. Keep the jam nut tight and check the threads for damage, since a loose shank can back out under vibration. Keep dirt and grit off the ball, and wipe the exposed parts after muddy trips.
When replacing a rod end, match the thread direction and shank size before removing the old one. Mark the orientation of the link so the new joint sits at the same angle, and set the length before tightening the jam nut. Check that the joint moves freely through its range without binding against nearby parts. Recheck the jam nut and the link after the first few drives, since fittings can settle under load.
- Keep the jam nut tight
- Check the liner for play
- Wipe grit off the ball after trips
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 186027-KIT |
| UPC | 70000621299 |
| Body material | 4340 chromoly, zinc coated |
| Ball material | AISI 52100, hard chrome plated |
| Liner | Teflon |
| Shank | 3/4 Inches – 16 |
| Bore | 5/8 Inches |
| Thread direction | Right hand |
| Included hardware | Jam nut |
Vehicle fitment
No vehicle years, makes or models are matched to this part. It is a universal fit part, but the shank and bore are the dimensions to match against the vehicle or linkage you are replacing. Compare those dimensions before choosing a rod end.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A jam nut is included. No other hardware or accessories are named.









