Select your vehicle

Trail Gear Clear LED Light – 180517-KIT

Trail Gear

Shop Trail Gear LED Replacement Bulbs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 180517-KIT clear 12V LED light
  • Polycarbonate lens, 2.5 in by 1 in
  • Epoxy sealed and 100% waterproof
  • Universal fit, meets SAE J2042-2003

Description

Overview

The Trail Gear 180517-KIT is a clear 12V LED light with a 2.5 in by 1 in polycarbonate lens. It is a universal fit, so no year, make or model applies to it.

The polycarbonate lens resists impact better than the more common acrylic. The light is 100% waterproof, sealed with epoxy and built to meet SAE Standard J2042-2003.

Key features

  • Polycarbonate lens, more impact resistant than acrylic
  • Sealed with epoxy
  • 100% waterproof
  • Meets SAE Standard J2042-2003
  • 12V LED, universal fit

Wiring and placement

An auxiliary light is only as useful as its placement. A low, forward-facing position helps with ground lighting on the trail, while a higher mount spreads light farther ahead. Choose a spot where the lens stays clear of mud, branches and spray, and keep the light away from hot exhaust parts. Clear lenses like this one suit general work lighting.

Wiring deserves as much attention as the mounting. Run the 12V supply through a fuse close to the power source, route the cable away from moving suspension parts, and seal every connection against water. Because the housing is epoxy sealed, the weak point is usually the cable entry and the connector, so inspect those first after a wet trip.

  • Use a fuse rated for the circuit
  • Secure cable runs with clips
  • Check ground connections for corrosion
  • Keep the switch within easy reach

Specifications

Brand Trail Gear
Part number 180517-KIT
UPC 70000621718
Color Clear
Lens size 2.5 in x 1 in
Lens material Polycarbonate
Voltage 12V
Standard SAE J2042-2003
Fitment Universal fit

Vehicle fitment

This light is not vehicle-specific and Trail Gear names no year, make or model. Check that the mounting location and lens size suit the spot where you plan to use it.

Installation notes

Run the 12V power supply through a fuse and check local rules on auxiliary lighting before mounting a light on a vehicle.

What’s included

The title identifies the item as a kit. Check the package contents against your installation before starting.

SKU: TGI180517-KIT Category:

Specification

Shipping weight 0.10 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

Is the Trail Gear 180517-KIT lens polycarbonate?

Yes. The lens is polycarbonate, which resists impact better than the more common acrylic plastic. It measures 2.5 in by 1 in, and the light is 100% waterproof and epoxy sealed.

What voltage does this Trail Gear clear LED light use?

The light is a 12V LED and meets SAE Standard J2042-2003. It is a universal fit, so confirm the mounting location and wiring suit your vehicle before installing.

Does the 180517-KIT include mounting hardware?

The title identifies this as a kit. Confirm the package contents, including any mounting hardware, wiring and quantities, before you start the installation.

How should the clear lens be cleaned?

Wipe the polycarbonate lens with a soft cloth and mild soapy water. Avoid abrasive pads, which scratch plastic lenses and cloud their clarity over time. Inspect the epoxy seal and the lens edges periodically for cracks.

How can I tell when the light needs to be replaced?

Replace the light when cracks, deep scratches or cloudiness reduce its output, or when moisture gets past the seal. Check the connectors and wiring at the same time, since water often enters at those points.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear LED Replacement Bulbs on Amazon