Select your vehicle
-13%

G2 Dana 60 Chromalloy Inner Axle Shaft – 97-2034-005

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana 60 passenger side inner axle shaft, 35 spline, 34.56 in overall length
  • Accepts 5-806X U-joint; machined for full circle clips
  • Fits 78-79 Ford Dana 60 front axles

Description

Overview

The G2 Axle and Gear 97-2034-005 is a Dana 60 chromoly inner axle shaft for the passenger side, with 35 splines and a 34.56 inch overall length. It fits 1978-1979 Ford Dana 60 front axles.

It is forged high-grade alloy steel with heat treatment that exceeds OEM specifications, and the differential or carrier must use the same 35 spline count. An inner shaft runs from the differential through the axle tube to the U-joint, so the two sides differ in length. At 34.56 inches, it is the long passenger side shaft on a Dana 60 front end.

Key features

  • Chromoly inner axle shaft for the Dana 60 front axle
  • Passenger side, 35 spline, 34.56 inch overall length
  • Accepts a 5-806X U-joint
  • Machined to accept full circle clips
  • Fits 78-79 Ford Dana 60 front axles.

Handling a long inner shaft

A Dana 60 inner shaft runs from the differential side gear through the axle tube to the U-joint, so its length, spline count and side all have to match the axle. The passenger side shaft is the longer of the two on a front axle, and it takes the most twisting load as it carries torque to the wheel. Before removal, note the position of the shaft and the clip style, and confirm the U-joint size matches the front axle.

Inspect the surrounding parts when the shaft is out. The inner seal is pressed where the shaft passes into the housing, and a worn seal leaks gear oil toward the brake area. Clean the tube and differential opening, check the side gear splines, and install fresh clips so the shaft stays locked. Long shafts are easy to bend, so support the axle during the job and avoid levering against the housing.

  • Note the clip style before removal
  • Inspect the inner seal during the job
  • Check the side gear splines for wear
  • Support the axle while the shaft is out

Specifications

The 97-2034-005 is a chromoly inner axle shaft for the Dana 60 front axle, with 35 splines and an overall length of 34.56 inches. Every figure in the table below is the manufacturer value for the 97-2034-005.

Brand G2 Axle and Gear
Part number 97-2034-005
UPC 631410097313
Part type Chromoly inner axle shaft
Axle Dana 60 front
Axle shaft location Passenger side inner
Spline 35 spline
Overall length 34.56 inches
U-joint Accepts 5-806X U-joint
Clip design Machined to accept full circle clips
Application stated 78-79 Ford Dana 60

Vehicle fitment

No vehicle year or model list is published for the 97-2034-005; check the manufacturer specifications for the exact application.

Its application is 78-79 Ford Dana 60 front axles.

Before ordering the 97-2034-005, compare its spline count, side and overall length with the shaft being replaced.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This is the long passenger side inner shaft. It accepts the 5-806X U-joint and full circle clips, so confirm those match the front axle.

SKU: G/297-2034-005 Category:

Specification

Shipping weight 32.00 lbs
Package dimensions 37.00 × 7.50 × 7.30 in
brands

Questions & Answers

What is the G2 97-2034-005 axle shaft?

The G2 Axle and Gear 97-2034-005 is a chromoly inner axle shaft for the Dana 60 front axle, passenger side. It has 35 splines, a 34.56 inch overall length and accepts a 5-806X U-joint.

Which axle is the 97-2034-005 made for?

It is made for 78-79 Ford Dana 60 front axles. Confirm your axle matches that application before ordering, including the spline count and side.

Is the 97-2034-005 a driver side shaft?

No. It is the passenger side inner shaft. The driver side inner shaft is a different part, so check the side on your axle before ordering.

Does the shaft need the same spline count as the differential?

Yes. The inner shaft engages the side gear through splines, so the counts must match. Count the splines on the old shaft and confirm the differential before ordering, and do not fit a shaft with a different count.

Should the axle seal be replaced with the shaft?

Often yes. The inner seal sits where the shaft passes into the housing, and a worn seal can leak gear oil onto the brake area. Replacing it during the job avoids a second teardown.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon