Overview
The G2 Axle and Gear 30-9014 is a rear wheel bearing kit for GM 14 Bolt axles with a 10.5 inch housing. It supplies the inner and outer wheel bearings with their races, plus a wheel seal, all for one side of the axle.
G2 Axle and Gear describes its wheel bearing kits as the items needed to replace front or rear wheel bearings. This kit is matched to the GM 14 Bolt 10.5 inch rear axle, and no specific vehicle is named.
Key features
- Inner wheel bearing and race
- Outer wheel bearing and race
- Wheel seal
- All parts for one side of the axle
- Rear application for the GM 14 Bolt 10.5 inch axle
Before you buy
Rear wheel bearings carry the weight of the vehicle and let the wheel turn smoothly on the axle tube. Over time the races can pit and the grease can thin, which is why it helps to inspect the hub, bearing and seal together whenever one of them is off. A new bearing on a worn race will not last, so look at the race surfaces before pressing anything in.
On a GM 14 Bolt axle, the seal keeps lubricant in and road water out. A seal that has dried or cracked is usually replaced with the bearings. If the housing was opened for other work, measure the bearing seat and confirm it matches the kit before starting the install.
- Feel for play by rocking the wheel at top and bottom
- Listen for a growl that rises with road speed
- Look for grease on the inside of the wheel
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-9014 |
| UPC | 631410095487 |
| Axle location | Rear |
| Axle type | GM 14 Bolt |
| Axle size | 10.5 inch |
| Coverage | One side |
Vehicle fitment
It is made for the GM 14 Bolt 10.5 inch rear axle. Match your axle housing to the kit, and confirm fit for your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each kit covers one side only, so a rear axle with two wheels needs two kits.
What’s included
- Inner wheel bearing and race
- Outer wheel bearing and race
- Wheel seal
