Overview
The G2 Axle and Gear 30-8030 is a front wheel bearing kit for 86-94 Toyota IFS front axles, with a Toyota 7.5 inch axle size. It includes Timken inner and outer wheel bearings with their races and a wheel bearing seal, all for one side.
This kit covers the items needed to replace a front wheel bearing set on one side. It is a direct fit for the Toyota IFS front axle.
Key features
- Timken inner wheel bearing and race
- Timken outer wheel bearing and race
- Wheel bearing seal
- All parts for one side of the axle
- Direct fit for the Toyota IFS front axle
Toyota IFS hub service
Independent front suspension hubs on Toyota trucks carry wheel loads through a bearing set and a seal, and wear in either can cause play or noise. A front bearing job is a good time to inspect the hub, spindle and brake parts, since these areas share wear with the bearings. Clean all surfaces before the new races are seated.
Bearing preload on a front hub is set carefully so the wheel turns freely without play. Repack the bearings with fresh grease, install the seal squarely and check for leaks after a short drive. Keep the opposite side’s parts separate during the job so the two sides are not mixed up.
- Inspect the hub and spindle
- Pack bearings with fresh grease
- Check the seal for leaks after driving
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-8030 |
| UPC | 631410095425 |
| Axle location | Front |
| Axle type | Toyota IFS |
| Axle size | 7.5 inch |
| Bearing make | Timken |
| Coverage | One side |
Vehicle fitment
Confirm the front axle type and size match before ordering, and confirm the year, model and trim of your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Timken inner wheel bearing and race
- Timken outer wheel bearing and race
- Wheel bearing seal
Not included: the bearings and seal for the opposite front wheel, since this kit covers one side only.




