Overview
The G2 Axle and Gear front wheel bearing kit, part number 30-8004, is built for the front wheels of 77-86 Jeep CJ vehicles. It replaces the front wheel bearings on one side of the axle and contains Timken inner and outer bearings with races plus a wheel bearing seal.
This kit is a direct fit for the Dana 30 standard front axle. Confirm the axle type on your vehicle before fitting the kit.
Key features
- Complete set of parts for one side of the front axle
- Timken inner wheel bearing and race
- Timken outer wheel bearing and race
- Includes a wheel bearing seal
- Direct fit for the Dana 30 standard front axle
Jeep CJ front end upkeep
Front wheel bearings on a Jeep CJ with a Dana 30 standard axle carry the vehicle weight and steering loads through the hub. Wear shows up as a rumble that changes with speed and as play when the tire is rocked at the top and bottom. Lift the front end safely and check the hub before replacing parts.
A worn seal lets grease escape and water in, so inspect it when the bearings are out and replace it with the bearings. Clean the hub bore and spindle, pack the bearings with an appropriate grease, and set the adjustment carefully so the wheel turns freely without play. Recheck the adjustment after the first drive, since bearings settle as they run in.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-8004 |
| UPC | 682034114870 |
| Position | Front, one side |
| Axle type | Dana 30 Standard |
| Included | Timken inner and outer wheel bearings and races, wheel bearing seal |
| Application | 77-86 Jeep CJ |
| Fitment | Direct fit |
Vehicle fitment
The kit is intended for 77-86 Jeep CJ vehicles with a Dana 30 standard front axle.
Wrangler generations and other CJ models are outside this match. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Front wheel bearing kit for one side: Timken inner wheel bearing and race, Timken outer wheel bearing and race, and a wheel bearing seal.
Not included: Hubs, spindle hardware and other axle components are not part of this kit.





