Overview
The G2 Axle and Gear 97-2034-006 is a Dana 60 chromoly inner axle shaft with 35 splines and a 15.98 inch overall length. It fits 1986-1997 Ford driver side and 1979-1991 Dodge passenger side Dana 60 front axles.
These axle shafts are engineered to carry the extra load of high-torque setups and to address faults common in factory shafts. The forging is high-grade alloy steel, heat treated to exceed OEM specifications. The 35 splines must agree with the gear set inside the axle. On a front axle the inner shaft carries torque from the differential to the U-joint, and the outer stub passes it toward the hub.
Key features
- Chromoly inner axle shaft for the Dana 60 front axle
- 35 spline with a 15.98 inch overall length
- Accepts a 5-806X U-joint
- Machined to accept full circle clips
- Fits 86-97 Ford and 79-91 Dodge Dana 60 front axles
Checking spline and side match
Spline count is the first thing to confirm on any inner shaft. A shaft only engages gears cut for the same spline count, so a mismatch will not seat correctly and can damage the differential. Once the count matches, check the side. Inner shafts for different sides are separate parts, and the overall length can differ enough that a wrong shaft will not fit the joint.
Because the shaft sits between the differential and the steering knuckle, it is usually removed with the axle fluid drained and the knuckle loosened. While it is out, inspect the inner seal and the U-joint, since both are easy to replace at the same time. Clean the spline area and apply the correct lubricant when reinstalling, and check for leaks after the first drive.
- Compare spline count with the old shaft
- Confirm driver or passenger side before ordering
- Inspect the seal and U-joint while the shaft is out
Specifications
The 97-2034-006 is a chromoly inner axle shaft for the Dana 60 front axle (also called Dana 61), with 35 splines and an overall length of 15.98 inches. The key dimensions are summarized below.
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2034-006 |
| UPC | 631410097320 |
| Part type | Chromoly inner axle shaft |
| Axle | Dana 60 front (also called Dana 61) |
| Axle shaft location | Passenger side inner (per the attribute listing) |
| Spline | 35 spline |
| Overall length | 15.98 inches |
| U-joint | Accepts 5-806X U-joint |
| Clip design | Machined to accept full circle clips |
| Application stated | 86-97 Ford driver side, 79-91 Dodge passenger side |
Vehicle fitment
No vehicle year or model list is published for the 97-2034-006; check the manufacturer specifications for the exact application.
It fits 86-97 Ford driver side and 79-91 Dodge passenger side applications.
Match the 97-2034-006 against your old shaft for spline count, length and driver or passenger side before installing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a driver side shaft for 86-97 Ford applications and a passenger side shaft for 79-91 Dodge applications. Confirm which side your axle needs before installation.







