Select your vehicle

G2 NP231 Transfer Case Rebuild Kit – 37-231

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear NP231 transfer case rebuild kit, part 37-231
  • Bearings, seals, bushings and gaskets
  • Chain not included
  • Fits Jeep XJ and YJ from 87-94

Description

Overview

The G2 Axle and Gear NP231 transfer case rebuild kit, part number 37-231, supplies the small parts needed to refresh a worn NP231 transfer case: bearings, seals, bushings and gaskets. The chain is not included.

It fits Jeep XJ and YJ models from 87-94, serving Cherokee and Wrangler owners of those years.

Key features

  • Bearings, seals, bushings and gaskets in one kit
  • Covers hard-to-find small rebuild parts
  • Designed for NP231 transfer case rebuilds
  • Chain not included
  • Direct Fit label on the product

Rebuild planning

An NP231 rebuild is usually done when seals leak, bearings grind or the case shifts poorly. Replacing bearings, seals, bushings and gaskets together addresses the wear points that tend to fail at the same time, so a partial repair often leads to a second teardown. Clean all parts thoroughly and compare each component with the old one before assembly.

Because the chain is sold separately, plan for it before you open the case. Measure the old chain and inspect the sprockets for hooked or worn teeth, since a worn sprocket can wear out a new chain quickly. Keep the gasket surfaces clean and check the fill and drain plugs for damage at reassembly.

  • Inspect sprockets for worn or hooked teeth
  • Check shafts and bearing surfaces for scoring
  • Replace gaskets rather than reusing them

Specifications

Brand G2 Axle and Gear
Part number 37-231
UPC 631410107425
Transfer case NP231
Includes Bearings, seals, bushings, gaskets
Not included Chain
Fits 87-94 Jeep XJ, YJ

Vehicle fitment

It is for Jeep XJ and YJ models from 87-94. Those are the Cherokee (XJ) and Wrangler (YJ), each within its own production years.

Not covered: Wrangler TJ and later models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Teardown and reassembly of this transfer case need the correct tools and some mechanical experience. Plan on a separate chain before starting.

What’s included

Bearings, seals, bushings and gaskets are included.

Not included: the chain.

SKU: G/237-231 Category:

Specification

Shipping weight 3.89 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ) likely fits1987–1994All
Jeep Wrangler (YJ) likely fits1987–1994All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is a chain included with the G2 NP231 kit 37-231?

No. The chain is not included. The kit supplies bearings, seals, bushings and gaskets for rebuilding an NP231 transfer case, so the chain must be sourced separately.

Which Jeep models does the 37-231 rebuild kit fit?

It is for Jeep XJ and YJ models from 87-94. Wrangler TJ and later models are not covered, so confirm your vehicle's year, model and trim before ordering.

What is the UPC of G2 part 37-231?

The UPC is 631410107425. The kit is from G2 Axle and Gear, titled NP231 Transfer Case Rebuild Kit, and listed under part number 37-231.

Should I replace the seals and gaskets together?

Yes, in most rebuilds. Seals and gaskets wear with age and heat, and replacing them with the bearings and bushings avoids reopening the case for a leak later. Check the old parts for hardening before deciding which items to skip.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon