Overview
The G2 Axle and Gear 25-2053 is a minor ring and pinion installation kit for the rear Dana 44 on a 2008-and-newer Jeep Wrangler JK, covering the 2008 through 2018 Wrangler JK years.
The kit is meant for a newer vehicle whose existing bearings can stay in place. It supplies the parts that are usually missing from a parts counter: a shim kit, a replacement pinion nut, a crush sleeve, a pinion seal, ring gear bolts, and sealant and compounds for the job.
Key features
- Minor kit for jobs that keep the existing pinion and carrier bearings
- Replacement pinion nut and crush sleeve
- Pinion seal and shim set
- New ring gear bolts
- Thread locking compound, gear marking compound and silicone sealer
Setting up a ring and pinion
Ring and pinion setup controls how the gear teeth mesh, and it affects noise, wear and gear life. Shims set the pinion depth and carrier position, so each change in shim thickness moves the tooth contact. Setup is best done with the gears marked and checked before the housing is closed up.
Gear wear and noise often point to a setup problem rather than a bad gear. Whining under load or a rough feel on the throttle can mean the contact pattern is off. Before reinstalling, inspect the bearings and seals even on a minor kit, since a worn bearing can undo a correct setup.
- Use gear marking compound to check tooth contact
- Record shim changes so you can return to a known setting
- Replace the pinion nut and crush sleeve as directed when setting preload
- Inspect the bearings and seals before reassembly
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2053 |
| UPC | 631410095203 |
| Axle location | Rear |
| Axle type | Dana 44 JK |
| Kit type | Minor kit, no bearings |
| Included | Pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, compounds and sealer |
Vehicle fitment
Based on the product title, this kit is for the rear Dana 44 on the 2008 and newer Jeep Wrangler JK. The JK is named with the 08 Up year range, so the years are 2008 through 2018.
The Rubicon and non-Rubicon master kits use bearings and are separate kits. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A ring and pinion setup depends on shim thickness and gear contact, so use the gear marking compound to check the tooth pattern and set the shims. Ring and pinion setup is precise work, and many installers have the carrier set up by a professional.
What’s included
Pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.








