Overview
The G2 Axle and Gear 25-2049 is a minor ring and pinion installation kit for the Dana 35 axle, for the front or rear axle position.
It is made for installs where the bearings stay in place. The kit includes a shim kit, a replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, thread locking compound and gear marking compound. The ring and pinion gear set is not part of the kit.
Key features
- Minor installation kit for the Dana 35 axle
- Pinion shims and carrier shims for setting up the gears
- Replacement pinion nut, crush sleeve and pinion seal
- Ring gear bolts and thread locking compound
- Gear marking compound for checking the contact pattern
- Silicone sealer included
- Designed for installs where the bearings do not need to be changed.
Setting gear mesh and preload
A ring and pinion set must be installed with correct pinion depth, backlash and bearing preload, and those settings are checked with the gear marking compound. The shims in this kit adjust the position of the gears, and small changes in shim thickness shift the tooth contact. An installer should work through each setting in order rather than rushing to a final torque. Record the readings as the job progresses so adjustments are easy to trace.
Break-in matters on a new gear set. Drive gently for the first stretch of miles, varying speed and load to let the teeth settle into the mesh. Check for leaks at the pinion seal and carrier cover after the first drives, and recheck the ring gear bolts once they have seen heat. Fresh fluid helps the new gears run cooler, so refill the carrier to the level your service guide requires.
- Set pinion depth before carrier shims
- Check backlash with a dial indicator
- Verify the contact pattern with marking compound
- Recheck ring gear bolts after break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2049 |
| UPC | 631410095166 |
| Product type | Minor ring and pinion installation kit |
| Axle | Dana 35 |
| Axle location | Front or rear |
| Kit type | Minor kit |
| Popular axle manufacturer | Dana |
| Axle-specific universal fit | Universal Fit (axle-specific, no vehicle list) |
| Contents | Pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound, silicone sealer |
Vehicle fitment
It is made for the Dana 35 axle, so confirm your axle is a Dana 35 before ordering.
The kit is not for other axles such as a different Dana, Ford or GM axle size. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is meant for gear installs where the bearings stay in place, so the axle’s existing bearings must be in good condition. The shims, crush sleeve and gear marking compound are the parts used to set pinion position, preload and the tooth contact pattern, which makes this a job for an installer with gear setup experience, followed by a careful break-in.
What’s included
- Pinion nut
- Pinion seal
- Crush sleeve
- Pinion shims
- Carrier shims
- Ring gear bolts
- Thread locking compound
- Gear marking compound
- Silicone sealer
Not included: ring and pinion gear set and bearings.






