Overview
The G2 Axle and Gear 85-2011B is a full spool for Ford 9 inch rear axles with 31 splines. A full spool links the left and right axle shafts, so both wheels receive power even when one is in the air. It suits builders who want a lightweight spool that works with all gear ratios.
The spool is machined from billet 4130 steel and built for hard off-road use. Confirm the axle spline count before ordering, since the spool has to match your shafts.
Key features
- CNC machined from billet 4130 steel
- Heat treated for durability
- Designed for 31 spline axles
- Works with all gear ratios
- Gives both wheels power when one is in the air
- Described by G2 as a light weight design
Choosing a full spool setup
A full spool is a fixed link between the axle shafts, so it fits best in a rear axle built for off-road work. Because both wheels always turn together, steering and braking can feel different on pavement, and tire scrub becomes more noticeable on tight turns. Choose it when the vehicle sees regular trail use and the owner accepts that trade-off for traction.
The Ford 9 inch carrier also needs attention during the swap. Ring and pinion selection, carrier bearing preload and carrier clearance all affect how the spool runs, and a shop familiar with this carrier can check each one. Keep the old ring gear and bearings out of the job only if they measure within spec.
- Confirm axle shaft spline count
- Check ring and pinion selection
- Set carrier bearing preload
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Model number | 85-2011B |
| UPC | 631410103656 |
| Material | 4130 billet steel |
| Spool type | Full spool |
| Axle location | Rear |
| Axle type | Ford 9 inch |
| Axle spline count | 31 splines |
| Gear compatibility | All gears |
Vehicle fitment
It fits Ford 9 inch rear axles with 31 splines. The fit depends on the axle housing and spline count, so confirm both before ordering.
A full spool changes how the axle drives, so confirm the axle and gearing before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A full spool is installed in place of the differential’s spider gears and needs professional setup, including bearing preload and gear mesh. Use a shop familiar with the Ford 9 inch carrier.
What’s included
The full spool. Not included: ring and pinion, carrier bearings and other internals needed for installation.






