Overview
The G2 Axle and Gear Ford 8.8 inch full spool (85-2013-31) is a CNC machined billet 4130 steel spool for Ford 8.8 inch rear axles with 31 splines. A full spool locks both axle shafts together, so both wheels receive power even when one wheel is in the air.
The spool is built for off-road traction and is light weight. It works with all gears and needs a C clip eliminator. Axle size and spline count define its fit more than vehicle model.
Key features
- CNC machined from billet 4130 steel
- Full spool sends power to both wheels, even with one in the air
- Light weight design
- Made for 31 spline axles
- Works with all gears
- Heat treated for maximum durability
Parts to plan for
A C clip eliminator holds the axle bearing in place without the C clip, so it becomes part of the install. Before fitting, check the bearing seating, the retainer and the axle shaft condition, since a full spool puts steady load on those parts. Replacing worn axle bearings during the job saves a second teardown.
Ford 8.8 inch carriers are common in off-road builds, and the ring gear, pinion and bearing preload should be checked after the spool goes in. Keep the gear oil fresh, and check the carrier after the first trail runs for chatter, play or leaks. Take the vehicle back for a short check drive once the work is done.
- Buy the C clip eliminator with the spool
- Inspect axle bearings and retainers
- Check ring gear contact after fitting
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2013-31 |
| UPC | 631410103595 |
| Material | 4130 billet steel, CNC machined |
| Spool type | Full spool |
| Axle type | Ford 8.8 inch rear |
| Axle spline | 31 splines |
| Gear compatibility | All gears |
| Required part | C clip eliminator (not included) |
Vehicle fitment
It fits Ford 8.8 inch rear axles with 31 splines. Confirm fit for your vehicle’s year, model and trim before ordering.
This spool is for Ford 8.8 inch axles and does not cover other axle families. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A C clip eliminator is required and is not included, so plan to buy one with the spool. Because a full spool changes how the axles drive, have an experienced installer check the setup after fitting.
What’s included
The spool is the item described. Not included: the C clip eliminator the spool requires.







