Overview
This full spool fits Toyota 8 inch V6 differentials with 30 spline axles. It links both axle shafts so power reaches both wheels even when one is off the ground, and it works with all gears.
It is built for the rear of a Toyota V6 setup, not for front axles. Machining and heat treatment make it suited to durability under hard use.
Key features
- Full spool design for both-wheel power
- Made for 30 spline axles
- Works with all gears
- Made for V6 differentials
- CNC machined from billet 4130 steel
- Heat treated for durability
Care and inspection
Full spools carry steady torque through the rear carrier, so the parts around them see more load than an open setup. Check the pinion bearing, carrier bearings and gear mesh after the first few trail runs, and inspect the axle shafts and U-joints for play. Heat from hard use can thin gear oil, so change it on the schedule the vehicle’s service needs call for.
Signs the carrier needs work include whine that changes with speed, clunks on throttle changes, and oil leaking from the cover seal. A full spool also reduces slip in the drivetrain, so a clunk or chatter on tight turns can point to a worn axle or a tire mismatch rather than the spool.
- Inspect pinion and carrier bearings
- Watch for whine or clunks
- Check cover seal for oil leaks
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Model number | 85-2043 |
| UPC | 631410103397 |
| Material | 4130 billet steel |
| Spool type | Full spool |
| Axle location | Rear |
| Axle type | Toyota 8 inch |
| Differential type | V6 |
| Axle spline count | 30 splines |
| Gear compatibility | All gears |
Vehicle fitment
It fits the Toyota 8 inch rear axle in V6 differentials with 30 spline axles. Confirm the axle and engine type against your vehicle before ordering.
It is not recommended for front axles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A full spool replaces the spider gears in the carrier and needs professional setup. Because G2 does not recommend it for front axles, confirm the rear position before the work starts.
What’s included
The full spool. Not included: ring and pinion, bearings and other carrier parts needed for installation.







