Select your vehicle

G2 Toyota 8 Inch 4 Cyl. Full Spool – 85-2041

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 85-2041 full spool for Toyota 8 inch 4 cylinder differentials
  • Bullet points list 30 spline axles, while the spline field is shown as Any
  • Works with all gears
  • Not recommended for front axles

Description

Overview

This full spool fits Toyota 8 inch 4 cylinder differentials. It links both axle shafts so both wheels get power when one is off the ground, and it works with all gears. It is not recommended for front axles.

The bullet points call for 30 spline axles, while the fitment table shows the spline field as Any. Confirm the spline count on your axle shafts before ordering.

Key features

  • CNC machined from billet 4130 steel
  • Heat treated for durability
  • Works with all gears
  • Made for 4 cylinder differentials
  • Not recommended for front axles

Before you buy

The main decisions for this spool are axle location, engine type and spline count. It is built for the rear of a Toyota 8 inch differential with a 4 cylinder, so a V6 carrier needs a different part. Compare the differential and spline count on your axle shafts before buying, because a mismatch leaves the spool unusable.

A full spool works with all gears, but the ring and pinion still set the final drive ratio and sound. Choose gears with the spool in mind, and plan for bearings and carrier parts that are often replaced during the swap. Keep the axle shaft condition in mind too, since a full spool loads the shafts continuously.

  • Confirm engine type and differential
  • Match spline count to the axle shafts
  • Replace worn carrier bearings during the swap

Specifications

Brand G2 Axle and Gear
Model number 85-2041
UPC 631410103403
Material 4130 billet steel
Spool type Full spool
Axle location Rear
Axle type Toyota 8 inch
Differential type 4 cylinder
Axle spline count 30 splines in the bullet points; Any in the fitment table
Gear compatibility All gears

Vehicle fitment

It fits Toyota 8 inch 4 cylinder rear differentials. Match the differential type and spline count to your axle before ordering.

It is for 4 cylinder differentials, not V6 differentials, and it is not recommended for front axles. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Full spools replace the spider gears and need professional gear setup. Confirm the spline count with the shop before the work starts.

What’s included

The full spool. Not included: ring and pinion, bearings and other carrier parts needed for installation.

SKU: G/285-2041 Category:

Specification

Shipping weight 7.10 lbs
Package dimensions 8.00 × 8.00 × 8.00 in
brands

Questions & Answers

How many splines does the 85-2041 use?

The spool is made for 30 spline axles. Confirm the spline count on your axle shafts before ordering, because the spool has to match the shafts exactly.

Is this spool for V6 Toyota differentials?

No. It is made for 4 cylinder differentials. The 85-2043 is the Toyota 8 inch V6 version, so match the engine type of your Toyota before ordering.

Can it go in a front axle?

No. It is not recommended for front axles. The axle location is rear, so this full spool is meant for rear Toyota 8 inch 4 cylinder differentials.

Do I need a locker or limited slip alongside a full spool?

No. A full spool already links both axle shafts, so adding a locker or limited slip to the same axle is unnecessary and can complicate the setup. Choose one traction method for each axle and keep the rest of the drivetrain in good condition.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon