Select your vehicle
-13%

G2 Emergency Brake Cable – 95-2049PC3

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 passenger side emergency brake cable 95-2049PC3, 69.75 inches long
  • Two cables required for each Wrangler
  • Made for the G2 Disc Brake Kit, with moderate bolt on installation
  • No vehicle years or models named; check fitment before ordering

Description

Overview

The G2 Axle and Gear 95-2049PC3 is a 69.75 inch passenger side emergency brake cable made for the G2 Disc Brake Kit. It is the final part needed to finish that kit.

Each Wrangler needs two of these cables, so a second cable is needed for each vehicle. Confirm the Wrangler generation and axle you have before ordering.

Key features

  • Passenger side cable, 69.75 inches long
  • Durable construction
  • Moderate bolt on installation
  • Two cables needed for each Wrangler
  • Made for the G2 Disc Brake Kit

Planning a two-cable install

Two cables are needed for each Wrangler, so plan both runs before buying. The cables link the parking brake to the rear brakes, so they should match in length, routing and clip position. Measure each run separately, since the left and right routes around the frame and axle are rarely identical.

Check the sheath ends, the equalizer and the guide clips at the same time. Corrosion or a stiff action at one end can make the brake feel weak even with a new cable. After installation, adjust the lever travel so both rear brakes engage evenly, and test the hold on a slope before driving normally.

  • Measure both runs before cutting
  • Match routing and clip positions
  • Inspect equalizer and guides
  • Test hold on a slope after adjusting

Specifications

Brand G2 Axle and Gear
Part number 95-2049PC3
UPC 631410124057
Side Passenger (labeled)
Length 69.75 inches
Construction Durable
Installation Moderate bolt on
Cables required Two for each Wrangler
Compatible kit G2 Disc Brake Kit
Fitment Direct fit

Vehicle fitment

It is a direct fit to the G2 Disc Brake Kit. Each Wrangler needs two cables. Confirm fit for the Wrangler generation and axle you have before ordering.

Confirm fit for the Wrangler generation and axle you have before ordering.

Installation notes

Installation is moderate and bolt on, and two cables are needed for each Wrangler. Measure the cable route before starting, since the cable is 69.75 inches long. Work on the parking brake only with the vehicle safely supported.

What’s included

One passenger side emergency brake cable, 69.75 inches long.

Not included: the second cable needed for each Wrangler, and the G2 Disc Brake Kit that the cable completes.

SKU: G/295-2049PC3 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 15.00 × 1.50 × 1.10 in
brands

Questions & Answers

How many G2 95-2049PC3 cables do I need?

Two for each Wrangler. This item is one passenger side cable, so a second cable is needed for each vehicle. Confirm which Wrangler generations use it before ordering both.

Is the G2 95-2049PC3 cable a passenger side part?

Yes, it is passenger side and is 69.75 inches long. It can be installed on either side, so choose the side your routing needs before you start the job.

How long is the G2 95-2049PC3 cable?

The length is 69.75 inches. Nothing about routing or alternate lengths is listed, so measure your route before starting the work.

Should both emergency brake cables be replaced together?

Usually, yes. Cables age at the same rate under the same conditions, so a worn one often means the other is close behind. Replacing both at once keeps travel and hold even across the rear brakes and avoids a second teardown later.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon