Overview
The G2 75-93 Dodge Dana 60 front wheel bearing kit, number 30-8018, provides the bearings and seal for one side of a front Dana 60 axle. It includes Timken inner and outer wheel bearings with races and a wheel bearing seal.
It is made for Dana 60 and Dana 61 front axles on 75-93 Dodge applications. Confirm the model and axle before installing.
Key features
- Timken inner and outer wheel bearings with races
- Wheel bearing seal included
- All parts for one side
- Front axle position
Front bearing preload basics
Front Dana 60 hubs use two bearings that must be set to the right preload so the hub turns freely with little play. Too tight and the bearings heat up and wear quickly; too loose and the wheel wobbles and the brake pads wear unevenly. Setting preload is a job that rewards patience and a careful service manual procedure.
Before fitting new bearings, inspect the spindle, races and hub bore for scoring or pitting. Clean out the old grease and pack the new bearings with fresh grease. Replace the seal at the same time, since a damaged seal lets water and dirt reach the new bearings quickly.
- Inspect spindle and races for scoring
- Repack bearings with fresh grease
- Set preload to the service manual procedure
- Replace the seal with the bearings
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Kit number | 30-8018 |
| UPC | 631410095364 |
| Position | Front |
| Axle types | Dana 60; Dana 61 |
| Bearings | Timken inner and outer, with races |
| Seal | Wheel bearing seal |
| Coverage | One side |
Vehicle fitment
Dana 60 and Dana 61 front axles
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Timken inner and outer bearings with races and a wheel bearing seal are included. Hub, rotor and steering components are not part of this kit.



