Overview
The Trail Gear control arm mount, part number TGI110145-1-KIT, is a single mount cut from 3/16 inch plate steel. It is a control arm mount for link-style suspension work, with a listed tube diameter of any.
The mount is sold as a single unit, so a matched set needs more than one.
Key features
- Built from 3/16 inch plate steel
- Control arm mount type
- Quantity: single
- Tube diameter: any
Planning a control arm mount
A control arm mount carries the arm’s pivot load into the axle or frame, so its position matters as much as its material. Before welding or bolting one in place, mark the arm’s pivot line and confirm that the mount keeps the arm at the angle the suspension design expects. Small shifts in location change the arm’s travel and can load the mount unevenly.
Steel plate mounts are often used with bushings or joints at the arm end, and those parts wear over time. Inspect the mount welds and the frame area around the mount after hard trail use, looking for hairline cracks or flexing. When a mount is replaced, check the arm and its ends too, since a worn end joint can put strain back onto the new part.
- Check weld penetration on every pass
- Confirm the pivot line before drilling
- Inspect mount welds after each season off-road
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI110145-1-KIT |
| Type | Control arm mount |
| Material | Plate steel |
| Thickness | 3/16 inch |
| Quantity | Single |
| Tube diameter | Any |
| Fitment | Universal fit (no vehicle named) |
Vehicle fitment
Universal fit is the only fitment stated, and no vehicle is named. Mounts like this depend on axle and frame layout, so confirm the mount location matches your build.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One control arm mount.
Not included: control arms, a second mount for a matched set, and hardware.








