Overview
The Trail Gear 300749-3-KIT, sold as Trail Safe Knuckle Ball Wiper Seals, is a kit of knuckle ball wiper seals for the 1986-1995 Suzuki Samurai. One kit completes one axle.
The double sided seal keeps grease in and dirt out, and it replaces the OEM felt and rubber. It is made from seal-grade polyurethane, not UHMW, so it is pliable enough to stretch over the knuckle ball during installation, which removes the need to cut the seal and the leaks that cutting can allow.
The one-piece seal was designed to address problems seen with the OEM design, such as sandy grease collecting on the knuckle balls after a trip. Kits come as pairs with rock rings, backing plates and new mounting hardware, so one kit covers a full front axle.
The knuckle ball is the spherical end of the axle tube that the steering knuckle pivots on. A wiper seal around it keeps grease from escaping and dirt from getting in, which is why this kit is aimed at owners who drive in sand, mud and dust.
Key features
- Double sided seal
- Replaces the OEM felt and rubber
- Seal-grade polyurethane, not UHMW
- Stretches over the knuckle ball, no cutting
- One kit completes one axle
- Includes backing plates, rock rings and hardware
Keeping the axle sealed
The knuckle ball seal is the barrier between the moving joint and the trail, so its condition has a direct effect on how long the joint lasts. Grease keeps the ball lubricated, and the seal keeps that grease from escaping while stopping sand and water from reaching the surface. Once a seal is damaged, grit can work into the joint quickly, so timely replacement is simpler than repairing the joint later. Check the seal every time the axle is serviced.
Good seal life depends on clean installation. Wipe the knuckle ball and the bore before fitting the new seal, and check that the rock ring and backing plate sit flat. Re-pack the joint with fresh grease when the seals are replaced, and look for dark, gritty grease as a sign that the old seal has failed. Torn edges, flattened lips and grease leaking around the rim are the usual signs that a seal is worn.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300749-3-KIT |
| UPC | 70000692747 |
| _pn | 300749-3-KIT |
| Part type | Knuckle ball wiper seal kit |
| Material | Seal-grade polyurethane |
| Position | Front |
| Coverage | One axle per kit |
| Fit type | Direct fit (Trail Gear) |
Check the seal fit against your knuckle balls before installation.
Vehicle fitment
It fits the 1986-1995 Suzuki Samurai.
The manufacturer fitment list for part 300749-3-KIT covers: 1986–1995 Suzuki Samurai.
Not listed: other Suzuki models and other makes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The seal stretches over the knuckle ball, so cutting is not needed. The kit includes mounting hardware, with rock ring sections bolted to backing plates.
What’s included
- 2 Trail Safe Samurai knuckle ball seal wipers
- 2 backing plates
- 4 rock ring sections
- 16 rock ring bolts
- 16 M6 lock washers
- 16 M6 flat washers









