Overview
The Trail Gear 301688-1-KIT is a Longfield Axle Super Set with a 30 spline count and Birfield joints. The kit includes inner and outer hub gears and creeper drive flanges. Trail Gear gives a direct fit label but names no years, makes or trims for it.
A Birfield is a constant-velocity joint style used in some axle shafts, so the joint type should be matched to the axle you are replacing.
Key features
- Inner and outer hub gears included with the kit
- Creeper drive flanges in the set
Hub gears and creeper drives
Hub gears sit between the axle shaft and the wheel hub, and creeper drive flanges connect the drive to the hub assembly. In a creeper setup, the gears provide a reduction that helps with slow crawling over rough ground. Because they change how the drivetrain turns, the gears and flanges should be treated as a matched set rather than mixed with unrelated parts.
Hub gear sets run in lubricant and carry heavy load during slow, low-speed work. Inspect the teeth for chips or pitting, look for metal in the oil, and check the flanges around the bolt holes for cracks. Keep the seals in good shape, because a leak lets grit into the gears and speeds wear.
- Inspect hub gear teeth for chips or pitting
- Check flanges around the bolt holes for cracks
- Use lubricant suited to gear sets and keep it at the correct level
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301688-1-KIT |
| UPC | 700006929915 |
| Spline count | 30 spline |
| Joint type | Birfield |
| Included hub gears | Inner and outer |
| Flanges | Creeper drive flanges |
Vehicle fitment
No vehicles are named for this kit. The direct fit label does not identify a vehicle, so match the 30 spline count and Birfield joint to your current axle before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes inner and outer hub gears and creeper drive flanges. Check the contents against your installation before starting.









