Overview
The Trail Gear rear wheel bearing kit, part number 303901-3-KIT, rebuilds one side of a rear axle. It includes Koyo brand bearings with an integral spacer, a ground bearing retainer and a rear axle wheel seal.
The kit is written for the Suzuki Samurai, but no model years or chassis code are given. To rebuild an entire rear axle, two kits are needed.
Key features
- Koyo brand bearings
- Integral spacer and ground bearing retainer
- OEM quality rear axle wheel seal
- Full set of instructions included
- Covers one side of the rear axle
Rear bearing rebuild tips
A rear wheel bearing kit replaces the bearings, spacer, retainer and seal on one side of the rear axle, so the old parts should be removed in order and laid out for comparison. Bearings and seals wear together, so a worn bearing often means the seal and retainer should be inspected at the same time. Keep the spacer orientation and retainer seat clean, since small errors can change bearing setting.
Rear axles on older off-road vehicles see mud, water and debris, so checking the axle tube and seal surface for corrosion or grooves is worthwhile before installing new parts. Use a clean work area and keep each side’s parts separate. A seal should be installed square and seated fully, and the bearing should turn smoothly with no roughness after assembly.
- Inspect the axle shaft seal surface
- Keep each side’s parts separate
- Check bearing play after the first drive
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 303901-3-KIT |
| UPC | 70000774147 |
| Position | Rear |
| Bearing brand | Koyo |
| Coverage | One side of the rear axle |
| Fit type | Universal Fit |
Vehicle fitment
The kit is written for the Suzuki Samurai, and the fit type is Universal Fit. Check the bearing and seal against your Samurai’s rear axle before ordering.
Model years and chassis codes are not identified for this kit, so the year range it covers is unknown. Verify the year, model and trim before ordering the kit.
Installation notes
The kit comes with a full set of instructions. Because it rebuilds one side only, order two kits for a complete rear axle rebuild.
What’s included
Koyo bearings with integral spacer, ground bearing retainer, rear axle wheel seal and a set of instructions.
Not included: Axle shafts and hubs are not identified as part of this kit. Check the package contents against your installation before starting.









