Overview
The Trail Gear 301346-1-KIT is a front and rear lift for the Toyota Tacoma from 2005 to 2014, covering the Base, Pre Runner and X-Runner trims. It adds 3 inches of lift at the front with a CNC-machined spacer and 2 inches at the rear with an add-a-leaf, leveling the truck and removing the factory rake. The lift height range is 2.5 to 3.5 inches.
Key features
- Front spacer lift machined from 6061-T6 aluminum
- Anodized finish to prevent corrosion
- Front spacer works with stock shocks and many other shock models
- Class 10.9 bolts supplied for the top spacer
- Rear add-a-leaf for rear lift
Keeping the front spacer tight
A front spacer lift relies on its top bolts and mounting surfaces to hold the new height. Any movement or wear between the spacer and the body can make the front feel loose, so the fasteners should be inspected early and at regular service. Aluminum spacers hold up well to corrosion, but the contact faces still need to be clean and free of damage.
The rear add-a-leaf also changes how the truck sits and loads, so it helps to check the front and rear heights together after the lift. Uneven stance can point to a spring pack that has not settled, or to a spacer that needs re-seating. Recheck the bolts after the first few drives, and keep an eye on steering response and tire wear.
- Retighten top spacer bolts after the first drives
- Check spacer contact faces for wear or debris
- Compare front and rear height for even stance
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301346-1-KIT |
| Suspension type | Spacer |
| Front lift | 3 inches |
| Rear lift method | Add-a-leaf |
| Lift height range | 2.5 to 3.5 inches |
| Spacer material | 6061-T6 aluminum, anodized |
| Bolts | Class 10.9 |
| Shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2014 Toyota Tacoma Base, Pre Runner and X-Runner trims. These years and trims are the vehicles the kit is confirmed for.
Other Tacoma generations, including the first-generation trucks from before 2005, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear add-a-leaf changes the rear spring pack, so the driveline angles should be checked after installation. Use the Class 10.9 bolts supplied for the top spacer, and keep the stock shocks in mind when ordering because shocks are not in the box.
What’s included
- Front spacer lift
- Rear add-a-leaf
- Class 10.9 bolts for the top spacer
Not included: shocks.








