Overview
The Trail Gear 300573-1-KIT is a spindle nut kit for wheel bearing retainer nuts on one side of an axle. Use it when the retainer nuts need replacing. The kit contains 2 nuts, a star washer and a flat index washer, which covers one side of the axle only.
The kit is sized for a particular bearing retainer, so compare it with your existing nuts and washers before ordering. Vehicle models and years are not known for this kit.
Key features
- 2 spindle nuts for the wheel bearing retainer
- Star washer and flat index washer included
- Kit covers one side of the axle
- Trail Gear part number 300573-1-KIT
Caring for retainer hardware
The retainer nut holds the wheel bearing in place on the spindle, and the washers keep it from backing off. A star washer and a flat index washer are typically used together, with the index washer seating against the spindle and the star washer locking the nut’s position. Because these parts control bearing setting, they should be replaced as a set rather than mixing old and new pieces.
Inspect the spindle threads for damage before fitting new hardware, since a damaged thread can make the nut hard to set correctly. Look for washers with bent tabs or cracks and replace any part that no longer sits flat. After the first trail runs, check that the nut has not loosened and that the wheel turns freely with no roughness or play.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300573-1-KIT |
| UPC | 70000690859 |
| Contents | 2 nuts, star washer, flat index washer |
| Coverage | One side of the axle |
Vehicle fitment
The kit is sold as universal fit. Match the nut and washer set to the retainer on your own axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes 2 nuts, a star washer and a flat index washer.









