Overview
The Trail Gear 300513-1-KIT is a complete front and rear lift for the Toyota Tacoma 2005–2012 Base and Pre Runner models. It combines a 3-inch front spacer lift, a 2-inch rear add-a-leaf and a differential drop kit, giving a lift height range of 2.5 to 3.5 inches. The front spacer works with stock shocks and many aftermarket shocks, and it levels the truck by removing the factory rake.
Key features
- 3-inch front spacer lift machined from 6061-T6 aluminum
- Anodized finish to resist corrosion
- Class 10.9 bolts for the top spacer
- 2-inch rear add-a-leaf for rear height
- Tacoma and FJ Cruiser differential drop kit
- Works with stock front shocks and many other shock models
Driveline after lifting
A rear add-a-leaf and a differential drop change how the rear driveline sits, so the angles should be measured once the lift is complete. Small changes in pinion angle can cause vibration at highway speeds, and an inspection after the first drives helps catch that early. Check the leaf pack and U-bolts for proper seating as well.
Ride quality changes with a lift like this, and the rear leaves may feel firmer when unloaded. Keep an eye on bump stop contact and brake hose length while the truck settles. Recheck fasteners after the first few drives, then include the suspension in routine service.
- Measure driveline angles after installation
- Inspect U-bolts and leaf seating
- Check brake hose length at full suspension travel
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300513-1-KIT |
| UPC | 70000659347 |
| Suspension type | Spacer |
| Front lift | 3-inch spacer |
| Rear lift method | Add-a-leaf, 2 inches |
| Lift height range | 2.5 to 3.5 inches |
| Spacer material | 6061-T6 aluminum, anodized |
| Shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
This front and rear lift is confirmed for the 2005–2012 Toyota Tacoma in Base and Pre Runner trims.
Model years after 2012 are not covered. Confirm your vehicle’s year, model and trim before ordering, including whether it is a 4WD or Pre Runner configuration.
Installation notes
The differential drop kit and the rear add-a-leaf change the rear driveline geometry, so have driveline angles checked after the lift. Because the kit does not include shocks, check that your current shocks have enough length for the increased ride height.
What’s included
- Front spacer lift for the Tacoma
- Rear add-a-leaf
- Tacoma and FJ Cruiser differential drop kit
- Class 10.9 bolts for the top spacer
Not included: shocks.









