Overview
The Trail Gear 1.25 inch creeper joint, part number TGI110766-KIT, is a weld-on joint kit for heavy-duty suspension links and rod ends. Trail Gear describes creeper joints as suited to today’s flexible suspension systems, and this kit is a DOM joint that is welded into place rather than a finished threaded joint.
The outer shell is a single forged piece, and the inner flex ball is 8620 tool steel riding on polyurethane bushings. Heavy-duty hardened steel washers hold the joint together. The joint moves up to 40 degrees when used with spacers. The flex ball is drilled to carry lubrication from the shell to the link mount bolt, and a threaded grease fitting on top keeps the joint serviceable.
Key features
- Weld-on joint kit
- Forged outer shell
- 8620 tool steel flex ball
- Polyurethane bushings and hardened steel washers
- Up to 40 degrees of movement when used with spacers
- Threaded grease fitting for lubrication
Welding and fabrication tips
A weld-on creeper joint is only as good as the link it is welded into, so plan the layout before striking an arc. Clamp the joint square to the link, and confirm the bushings are protected from the heat of welding. Remove paint and grease from the weld area so the weld fuses cleanly, and let the link cool before reassembly.
Once the link is complete, work the joint through its full travel to check clearance against brackets, axle components and the frame. Any binding at the stop should be corrected before the truck is driven on rough ground. Lubricate the joint through the top fitting after the first install.
- Square the joint to the link before welding
- Protect polyurethane bushings from weld heat
- Test full travel before trail use
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI110766-KIT |
| Size | 1.25 inch |
| Joint details | Weld-on joint kit |
| Type | DOM |
| Flex ball | 8620 tool steel |
| Bushings | Polyurethane |
| Maintenance | Serviceable |
| Maximum movement | Up to 40 degrees with spacers |
Vehicle fitment
The kit is universal in fitment and fits no single vehicle, year or chassis. It is a joint for building or modifying suspension links, so the match depends on the link and mounting size on your truck.
Confirm fit for your vehicle’s year, model and trim before ordering, and confirm the link size before welding.
Installation notes
Installation requires welding, so the joint must be welded into the link by a qualified welder. Check the joint’s movement and clearance once the link is complete.
What’s included
One 1.25 inch weld-on creeper joint kit, part number TGI110766-KIT.









