Brackets, Gussets & Tabs
Brackets, gussets and tabs for builders working on axles and suspensions. This fabrication branch includes axle trusses, axle brackets and bracket kits, ball gussets, shock mount brackets, leaf spring perches, control arm mounts and raw laser-cut tabs. Brands include Artec Industries, Trail Gear, Blue Torch Fabworks and G2 Axle and Gear. Review specifications on each product page, then compare the products below.

Big tires and long-travel suspension put loads on an axle housing that the factory brackets were never built for. This is the raw steel for a stronger build: trusses, link and track bar mounts, spring perches, coil buckets and blank tabs that you weld or bolt on to reinforce an axle or set up custom geometry.
Axle trusses are more than half of this section, mostly for Dana 30, 44 and 60 housings, sold as full kits or top plates alone. Control arm mounts and axle brackets cover link, track bar and shock mounting points, often sold by side and position. Complete bracket kits and swap kits help when you put a different axle under a Jeep. Check plate thickness, axle tube diameter and whether the part needs welding.
Shop brackets, gussets and tabs
Popular fabrication brackets
-
Axle Truss
G2 Dana 44 Front Axle Truss – 68-2051
- Front Dana 44 axle truss and armor system for the Jeep Wrangler JK
- Heavy-duty steel: 1/4 inch main components, 1/8 inch reinforcement plates
- Includes the axle truss, lower control arm skids, inner C gussets and track bar bracket
- Welding required, including to the cast center section
SKU: G/268-2051 -
Axle Truss
G2 Dana 30 Front Axle Truss – 68-2050
- Fits the 2007–2018 Jeep Wrangler JK with a Dana 30 front axle
- Heavy-duty steel: 1/4-inch main components and 1/8-inch reinforcement plates
- Includes gusset, truss and bracket
- Welding required, including to the cast center section
- Unpainted, without a steering ram mount; part number 68-2050
SKU: G/268-2050 -
-
Axle Truss
G2 Dana 44 Front Axle Top Truss – 68-2051-1
- Front Dana 44 top truss for the Jeep Wrangler JK, 2007-2018
- Heavy-duty steel with 1/4-inch main components and 1/8-inch reinforcement plates
- Welding required, including to the cast center section
- Two-door and four-door JK models for US-spec vehicles
- Part number 68-2051-1, UPC 631410121209
SKU: G/268-2051-1 -
-
-
Axle Bracket
Rubicon Express Front Axle Bracket Kit – RE9968
- Rubicon Express front axle bracket kit, part number RE9968
- Laser cut from 3/16-inch cold rolled steel and CNC formed
- Bare steel; the kit requires welding
- Includes brackets RE9968 through RE9993
- Made for a Jeep TJ Wrangler, 1997–2006
SKU: R/ERE9968 -
Control Arm Mount
TeraFlex Long Arm Bracket Kit – 1968000
- TeraFlex long arm bracket kit, part TER1968000
- Fits 2020-2026 Jeep Gladiator (JT) with 36-inch lifts
- Upper and lower mounts in each bracket
- Long control arms are not included and must be added separately
- Can be added to an existing suspension lift
SKU: TER1968000
Fabrication bracket reference
Material, tube size and kit contents taken from listings in this category. Many brackets are sold one side or one position at a time, so build a full parts list before ordering.
Material and tube size on listings
| Rubicon Express RE9968 bracket kit | Laser cut 3/16" cold rolled steel |
|---|---|
| Currie CE-7111 lower arm brackets | Laser cut 3/16" steel, radiused, pair |
| TeraFlex 3992790 FlexArm mount | 3/16" steel, for 3" axle tubes |
| Artec JK3001 Dana 30 truss | 1/4" and .130" mild steel |
| Artec One Ton Front 60 swap kit | 3/8" truss top, 1/4" gussets, brackets |
| Artec BR1137 lower arm brackets | For 3-1/2" tubes, with skids |
| Artec BR1024 Panhard mount | For 3" tubes, adjustable |
Axle swap and upgrade kits listed
| Artec One Ton Front 60 swap kit | 1997–2006 TJ with a Dana 60 front |
|---|---|
| Artec JK6042 | JK with a 1999–04 Super Duty Dana 60 front |
| Artec TJ8805 | OEM lower arm brackets for a Ford 8.8 swap |
| TeraFlex 3990700 | Front bracket kit for JK CRD60 axles |
| Rock Krawler RK07702 | Rear truss, Dynatrac XD 60 in JK/JL/JT |
What G2 truss part numbers include
| 68-2050 / 68-2051 (front D30 / D44) | Truss, gusset and bracket |
|---|---|
| 68-2050-1 / 68-2051-1 | Top truss only |
| 68-2052 (rear Dana 44 truss system) | Upper link mount sold separately |
| 68-2052-2 | Upper link mount |
| 68-2052-3 | Rear coil buckets |
| All of the above | Unpainted steel, welding required |
Sold by position (Rubicon Express)
| RE9991 | Front lower arm bracket, passenger side |
|---|---|
| RE9993 | Front lower arm bracket, driver side |
| RE9986 | Front upper arm bracket, passenger side |
| RE9976 | Rear upper arm bracket, passenger side |
| RE9953 front axle bracket kit | Perches, arm, shock, track bar, sway mounts |
These are structural, weld-on parts. Confirm the axle, tube diameter and side for each bracket, and have a qualified welder do the final welds if you are not experienced.
All Brackets, Gussets & Tabs 80 parts
-
-
Axle Bracket Kits
Tuff Country Radius Arm Kit with Mounting Brackets – 24863
- Tuff Country radius arm kit with mounting brackets, part T/C24863
- Extended length radius arms for the 1983-1997 Ford Ranger
- Sharper turning radius and higher ground clearance, per the maker
- Longer wheel travel and increased suspension articulation
- Direct fit for 1983-1997 Ford Ranger trims
SKU: T/C24863 -
Axle Truss
Trail Gear Rock Assault Nine Axle Truss – 302552-KIT
- Rock Assault Nine axle truss, part number TGI302552-KIT, from Trail Gear
- Short specifications list the truss as rear
- Fits 1985 to 1995 Toyota 4Runner, 1979 to 1995 Toyota Pickup and 1995 to 2004 Toyota Tacoma
- Direct fit for the Toyota vehicles covered
SKU: TGI302552-KIT -
Axle Truss
Trail Gear Rock Assault Axle Truss – 302549-1-KIT
- Rock Assault axle truss, part number TGI302549-1-KIT, for axle housing protection
- Fits 1985 to 1995 Toyota 4Runner, 1979 to 1995 Toyota Pickup and 1995 to 2004 Toyota Tacoma
- Confirm front or rear axle position before ordering
- Built for use with an OEM axle
SKU: TGI302549-1-KIT -
-
Control Arm Mount
TeraFlex Long Arm Bracket Kit – 1968000
- TeraFlex long arm bracket kit, part TER1968000
- Fits 2020-2026 Jeep Gladiator (JT) with 36-inch lifts
- Upper and lower mounts in each bracket
- Long control arms are not included and must be added separately
- Can be added to an existing suspension lift
SKU: TER1968000 -
Axle Truss
Rock Krawler JK/JL/JT Dynatrac XD 60 Rear Axle Truss – RK07702
- Rock Krawler RK07702 rear axle truss for the Dana 60 axle type, built for the Dynatrac XD 60
- Rear axle location; no steering ram mount
- Fits 2007 to 2018 Jeep Wrangler JK, 2018 to 2026 JL and 2020 to 2026 Gladiator JT
- Made in the U.S.A.
SKU: RKSRK07702 -
-
-
Parts for fabricators
These parts are building blocks for suspension and axle work. They are meant for welding or bolting into a project by people who understand the loads involved, such as when building a link suspension, swapping an axle or strengthening a weak point. Many are weld-on, so treat them as structural components.
What the subcategories cover
- Axle trusses: a steel brace that welds along the axle tube to resist bending, popular on Dana 30 and Dana 44 axles under larger tires.
- Axle brackets: link, track bar and Panhard mounts that weld to the axle housing.
- Ball gussets: reinforce the area around the steering knuckle ball joint.
- Shock and coilover mounts: locate shocks at the axle or frame.
- Spring perches and control arm mounts: hold leaf springs or arms in position.
- Tabs: laser-cut steel pieces for building custom mounts.
How to choose
First identify the axle or frame that the part must fit, such as Dana 30, Dana 44, Dana 60 or another axle, and whether it is a front or rear application. Tube diameter, bracket thickness and bolt hole size must match your project. Many mounts are listed as universal but still require careful measuring. Truss kits are often vehicle specific and may include axle swap hardware, so check what is included.
Look at the material and thickness, as thicker plate adds strength and weight. Check that the part is made from weldable steel and whether it arrives bare or coated. Coatings must be removed at weld areas.
Welding and installation
Axle and suspension welds carry safety-critical loads. Proper preparation, correct filler material, penetration and heat control matter, and a poor weld can fail without warning. If you do not have welding experience, hire a qualified fabricator. Measure geometry carefully, including pinion angle, link angles, track bar level and axle centering, before final welding. Avoid overheating axle tubes, since that can warp the housing.
Fitment and checks
After installation, inspect welds and bolts regularly, especially after hard trail use. Confirm fitment for your exact vehicle and axle, and follow the manufacturer's specifications and instructions. Alignment and driveline checks are recommended after changes.
Planning before you cut or weld
Good fabrication starts with measurement and a plan. Sketch the suspension geometry, including link lengths, angles and instant center, before locating any bracket. Use jack stands, a level surface and tools such as a straightedge, a tape measure and an angle finder to verify axle position. Tack weld parts first and recheck everything before final welds, because it is much easier to move a tack than a finished weld. Clean paint and coatings from the weld area, wear proper eye and respiratory protection, and keep a fire extinguisher nearby. Consider stress risers too: avoid abrupt ends on gussets, round the corners and keep welds away from high-flex areas. When the work is complete, inspect the welds, paint the bare metal to prevent rust and recheck bolts after the first trail run.
Common mistakes include welding without measuring first, using the wrong filler for the base steel, and trusting a bracket's appearance rather than its thickness. Check that the plate thickness suits the load, and avoid placing welds on the tension side of thin tubing without reinforcement.
Popular Brackets, Gussets & Tabs brands
- Artec Industries (33)
- Rubicon Express (15)
- G2 Axle and Gear (10)
- Trail Gear (6)
- TeraFlex (5)
- Blue Torch Fabworks (3)
- Rock Krawler (2)
- Low Range Offroad (1)
- Crown Automotive (1)
- Mountain Off Road Enterprises (1)
- Rugged Ridge (1)
- RT Off-Road (1)
Brackets, Gussets & Tabs FAQ
What does an axle truss do?
A truss is a steel brace welded along the axle tube to resist bending and keep the housing straight. It is common on larger-tire builds. Fit depends on the axle model, so confirm the compatible axle on the product page.
Do I need to weld these brackets?
Many brackets and gussets are weld-on, while some mounts and kits bolt in. Check the product description. For safety-critical axle and suspension welds, use an experienced welder or professional fabricator.
What is a ball gusset?
A ball gusset is a reinforcing piece around the steering knuckle ball joint area on some axles. It helps strengthen the area, particularly with large tires or hard use. It must match your axle type.
What are laser-cut tabs used for?
Tabs are precision-cut steel pieces that fabricators use to make custom mounts, such as for links, shocks or brackets. Check the material thickness and the hole sizes and make sure they suit the load.

















