Overview
The Trail Gear 303384-2-KIT is a bolt-on fairlead mount in bare steel. It works with either a hawse or a roller style fairlead and is designed to fit most bumpers, with a pre-drilled bolt pattern for most 5000-9500 model low-profile winches.
The kit includes 3/8 inch-16 and M10-1.5 extended winch mount hardware, covering both thread sizes.
Key features
- Universal design for most bumpers
- Works with hawse or roller style fairleads
- Pre-drilled bolt pattern for most 5000-9500 model low-profile winches
- Extended winch mount hardware in 3/8 inch-16 and M10-1.5
- Bare steel finish
Mounting a fairlead on a bumper
A fairlead mount carries the fairlead and transfers winch load into the bumper, so the mounting area matters as much as the mount itself. Most bumpers have a flat face or a central opening that the mount can bolt to, but the bumper’s own thickness and bracing decide how much load it can take. Look for solid points on the frame or bumper body rather than thin panels.
Choose the hardware size to match the winch’s mounting holes and the mount’s own holes. Do not mix sizes on the same joint. Check the fairlead’s clearance with the winch drum and with the bumper edge before tightening. Recheck torque on all fasteners after the first few trail runs, since bolts can loosen under vibration.
- Check the bumper’s mounting points for cracks or thin metal
- Use the thread size that matches each mounting hole
- Recheck fasteners after the first few trail runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 303384-2-KIT |
| UPC | 700007372591 |
| Finish | Bare steel |
| Winch pattern | Most 5000-9500 model low-profile winches |
| Hardware | 3/8 inch-16 and M10-1.5 extended winch mount hardware |
| Fairlead type | Hawse or roller style |
Vehicle fitment
It is a universal fit for most bumpers, so check the bumper and winch before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the pre-drilled pattern matches your winch, then choose the hardware size that fits its mounting holes.
What’s included
The kit includes the bolt-on fairlead mount and 3/8 inch-16 and M10-1.5 extended winch mount hardware.
Not included: a hawse or roller fairlead, which the mount is designed to accept.












