Overview
The Trail Gear 301392-KIT is a full hydraulic steering kit for Toyota pickups and 4Runners, supplied as one system with a double ended ram and clevis kit, a full hydraulic steering pump, an orbital unit, a reservoir and hoses. The manufacturer fitment list names the 1988–1995 Toyota 4Runner (DLX, SR5) and the 1988–1995 Toyota Pickup (Base, DLX, SR5).
This is Trail Gear’s first complete Toyota full hydraulic steering kit. It is designed for 3.0 V6 engines in 89-95 Toyota pickups and 4Runners, and all mounting brackets are included and designed for Toyota applications and easy installation.
The ram length is the main choice. The 6-inch ram and clevis kit has 6 inches of travel and suits Toyotas and narrowed Dana 44s. The 8-inch ram and clevis kit has 8 inches of travel and was made for Dana 44s and custom-length Dana 60 applications. The 10-inch ram and clevis kit has 10 inches of travel and is used for buggies and comp rigs with up to 45-degree steering radius.
Key features
- Full hydraulic steering pump with all-steel housing, rated at 4.5 GPM of flow and 1650 PSI of pressure
- Double ended ram with 2.25-inch bore and 1.125 inch rod
- Ram stroke options of 6-inch, 8-inch or 10-inch
- Steel braided high pressure hoses with crimped-on ends
- Primary and secondary rod seals, a two wiper seal design and a triple lip piston seal
- The bushing lets the rod absorb higher side loads.
- Orbital unit available at 100ml, 125ml or 160ml
- 4340 chromoly rod with 3/4×16 female threads on each end
Full hydraulic system basics
A full hydraulic kit replaces the stock steering gear with a pump, a ram and a set of high pressure lines, so every connection carries system pressure. The ram length, the orbital size and the pump flow all work together. A longer ram needs careful axle clearance, and a small orbital can make the steering feel slow at parking speeds.
Hoses and fittings deserve regular attention. Look for chafing where lines cross the frame, weeping at crimped ends and any kink that restricts flow. Keep the reservoir clean, and bleed the system after any line is opened so air does not reach the ram.
- Match ram length to axle clearance
- Watch hoses where they cross the frame
- Bleed the system after line work
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301392-KIT |
| UPC | 700007808981 |
| Listed application | 1988–1995 Toyota 4Runner (DLX, SR5); 1988–1995 Toyota Pickup (Base, DLX, SR5) |
| Engine | 3.0 V6 |
| Pump housing | All steel |
| Pump flow | 4.5 GPM |
| Pump pressure | 1650 PSI |
| Ram stroke | 6-inch, 8-inch or 10-inch options |
| Ram bore | 2.25-inch |
| Ram rod | 1.125 inch, 4340 chromoly |
| Rod threads | 3/4×16 female on each end |
| Cylinder finish | Black zinc-plate |
| Piston seal | Triple lip |
| Rod seals | Primary and secondary |
| Orbital sizes | 100ml, 125ml or 160ml |
| Hoses | Steel braided with crimped-on ends |
| Hardware | All necessary hardware |
Vehicle fitment
It fits 1988-1995 Toyota 4Runner (DLX, SR5) and 1988-1995 Toyota Pickup (Base, DLX, SR5), including 3.0 V6 engines in 89-95 Toyota pickups and 4Runners.
Other model years and vehicle generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 10-inch ram is the choice for the Rock Assault 9 Front Axle Housing. Match the ram length to your axle before installation, since the 6-inch, 8-inch and 10-inch options suit different setups.
A full hydraulic system runs high pressure lines, so have the finished installation checked for leaks and steering response before driving the vehicle.
What’s included
Full hydraulic steering pump with pulley, tie rod kit, double ended ram and clevis kit listed in 6-inch, 8-inch or 10-inch lengths, orbital unit (100ml, 125ml or 160ml), double ended ram mounting kit, steering column, orbital mounting kit, reservoir with filter, reservoir bracket, PS fluid cooler, power steering belt, complete hose kit and all necessary hardware.
Not included: The ram length is selected with the kit, and power steering fluid is not included.









