Overview
The Trail Gear 1 inch creeper joint, part number TGI110771-KIT, is a heavy-duty finished rod end for suspension links. Trail Gear calls these heavy-duty rod ends ideal for today’s flexible suspension systems. This kit is a finished joint, supplied with a right-hand thread and a jam nut.
The outer shell is a single forged piece. The flex ball is made from 8620 tool steel and rides on polyurethane bushings, held together by heavy-duty hardened steel washers. The joint can move up to 40 degrees when used with spacers. The flex ball is drilled to carry lubrication from the shell to the link mount bolt, and a threaded grease fitting on top services the joint.
Key features
- Single forged outer shell
- Inner flex ball of 8620 tool steel
- Polyurethane bushings
- Heavy-duty hardened steel washers
- Up to 40 degrees of movement when used with spacers
- Threaded grease fitting and cross-lubrication flow through the ball
Articulation and link geometry
A creeper joint sits at the end of a suspension link and lets the link follow the arc of the axle as it moves. Because the joint carries that movement, its bushings and washers take most of the wear over time. Setting the link length carefully keeps the joint working in its middle range instead of at the end of its travel.
Spacers change how far the joint can move before it binds, so check the articulation with the spacers you plan to use. After adjusting length, tighten the jam nut fully and confirm the joint still turns freely. Grease the fitting regularly, and replace the joint if play or binding develops at full travel.
- Check the jam nut after every length adjustment
- Test articulation with the spacers installed
- Grease the fitting after trail use
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI110771-KIT |
| Size | 1 inch |
| Joint details | Finished joint |
| Type | Forged |
| Flex ball | 8620 tool steel |
| Bushings | Polyurethane |
| Maintenance | Serviceable, threaded grease fitting |
| Thread direction | Right |
| Maximum movement | Up to 40 degrees with spacers |
| Jam nut | Included |
Vehicle fitment
This is a universal-fit joint, so it is not tied to a specific vehicle, year or chassis. The right fit depends on the link’s mounting and thread size on your truck. Check the joint against the link and mounting bolt before ordering.
Before ordering, match the joint’s thread and mounting size to your own link.
Installation notes
Use the jam nut to lock the joint once the length is set, and fit the grease fitting so it can be serviced. Check the joint’s range of movement against the spacers you plan to use.
What’s included
One 1 inch finished creeper joint with a jam nut.









