Select your vehicle
-13%

Trail Gear Axle Housing Kit – 140320-1-KIT

Trail Gear

Shop Toyota Tacoma Axle Housing on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front axle housing kit with 3 in. offset tubes
  • Forged 1035 steel knuckle balls
  • Fits 1995–2004 Toyota Tacoma (Base, DLX, Limited, Pre Runner, S-Runner, SR5)
  • Ground clearance gain of 3/8 in. under the axle tubes

Description

Overview

The Trail Gear 140320-1-KIT is a front axle housing kit with offset axle tubes for 1995–2004 Toyota Tacoma trucks in Base, DLX, Limited, Pre Runner, S-Runner and SR5 trim.

The axle tubes sit above the housing centerline, so the inner axles run near the bottom of the tubes and add 3/8 in. of ground clearance under the tubes. The knuckle balls are forged from 1035 steel. The tubes are 5/16 in. thick DOM steel with a 3 in. outer diameter, and the design is built from all-new parts.

Key features

  • Front axle housing kit with offset axle tubes
  • Forged 1035 steel knuckle balls
  • 5/16 in. thick DOM axle tubes, 3 in. outer diameter
  • 3/8 in. ground clearance gain under the tubes

Front axle upgrades and checks

A front axle housing carries the axle shafts, the knuckles and the steering geometry, so changing it affects more than ground clearance. Offset tubes move the axle shafts and their joint angles, which is why driveline angle should be checked once the new housing is in place. Many owners fit matching front driveshaft and steering components at the same time, since ball joints, tie rod ends and the track bar set the alignment you feel on the road.

Before installing, inspect the old housing for cracks around the tube welds and check the knuckle bearings and seals for play or leaks. Replace worn ball joints and bushings while the axle is apart, and have the front end aligned afterward. Expect a few trail runs to show whether bolts and brackets have settled, and re-check them once the vehicle has been driven hard.

Specifications

Brand Trail Gear
Part number 140320-1-KIT
Front or rear Front
Housing type Toyota
Axle tube 5/16 in. thick, 3 in. outer diameter, 1020 DOM steel
Knuckle balls Forged 1035 steel
Ground clearance gain 3/8 in. under the axle tubes

Vehicle fitment

It fits the 1995–2004 Toyota Tacoma in Base, DLX, Limited, Pre Runner, S-Runner and SR5 trim.

Check your Tacoma’s year against the 1995–2004 range before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Toyota Tacoma1995–2004Base, DLX, Limited, Pre Runner, S-Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Trail Gear 140320-1-KIT fit a 1995 to 2004 Toyota Tacoma?

Yes. It fits 1995–2004 Toyota Tacoma models in Base, DLX, Limited, Pre Runner, S-Runner and SR5 trim. Confirm your trim before ordering.

Is this a front or rear housing?

It is a front axle housing kit, as the product title and specifications state. The housing offsets its axle tubes above the centerline for 3/8 in. of extra ground clearance.

How much clearance does the offset design add?

The offset axle tubes sit above the housing centerline and add 3/8 in. of ground clearance under the tubes. The knuckle balls are forged from 1035 steel.

Should other front end parts be replaced when fitting an axle housing?

Often yes. Inspect ball joints, tie rod ends, bushings and wheel bearings while the axle is apart, since they wear at a similar pace and are easier to replace during the job. Have the front alignment checked once the work is complete.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Axle Housing on Amazon