Overview
The Trail Gear 300705-1-KIT is a front differential drop kit, so it is meant for the front axle. Its spacers are aluminum, and the kit is marked Direct Fit with no particular vehicle named.
Key features
- Front differential position
- Aluminum spacers
- Grade 8 zinc-plated hardware
- Class 8.8 zinc-plated bolts
Before lowering the axle
A front differential drop kit moves the housing down, which changes the angle between the pinion and the driveshaft. The change matters most under power and at full suspension travel, where a steep angle can increase vibration and load on the u-joints. Spacers relocate the housing but leave the rest of the driveline where it was, so the whole setup should be judged together.
Inspect the front driveshaft, pinion yoke and axle seals before fitting. Lowering the housing can stretch the breather hose and vent line, so check that both reach without tension. Clean the mounting faces, and replace hardware that shows thread damage or corrosion instead of reusing it.
- Check driveshaft u-joints for play before and after fitting
- Re-torque the hardware after the first few trail runs
- Inspect the breather line for kinks or tension
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300705-1-KIT |
| UPC | 70000681209 |
| Location | Front |
| Spacers | Aluminum |
| Hardware | Grade 8, zinc-plated |
| Bolts | Class 8.8, zinc-plated |
| Fitment | Direct Fit (no vehicle named) |
Vehicle fitment
Trail Gear’s Direct Fit label gives no vehicle, year or trim, so verify the axle before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Once the front differential is lowered, driveline angles change, so an alignment check after fitting is a sensible step.
What’s included
Front drop kit with aluminum spacers, Grade 8 zinc-plated hardware and Class 8.8 zinc-plated bolts.









