Overview
The Trail Gear 303722-KIT is an interlocking tube clamp kit for placing a support tube across a truggy or buggy, so a motor, transmission or seat can be removed. The clamps are machined from 100% 4130 chromoly steel.
The clamps are sold as universal fit. They are not made for one specific make, model or year, so measure your tube and frame layout first.
Key features
- Interlocking clamps allow a support tube to be removed for motor, transmission or seat access
- 100% 4130 chromoly steel construction
- Two socket head cap screws included
- Designed for truggy and buggy support tubes
Before fitting the tube
Support tubes carry real load on a buggy or truggy, and the joint is where the frame is most often opened up. Interlocking clamps let you pull a tube section without losing the rest of the structure, which saves time when a motor, transmission or seat needs service. Expect the clamp to see repeated movement, so the fit and fasteners deserve attention on every visit to the workbench.
Plan the layout with everything installed. Confirm that the clamp sits clear of the drivetrain, steering linkage and body mounts, and that the tube can be lifted out with the clamp removed. A tube that sits square in the clamp distributes load more evenly than one that is pulled to one side. Use thread locker on the socket head screws only if your fastener guidance allows it, and keep a torque record so loosening is easy to spot.
- Mark the tube position before removal
- Check for play at the joint each time it is opened
- Replace fasteners that show stretching or damaged heads
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 303722-KIT |
| UPC | 700007648821 |
| Material | 100% 4130 chromoly steel |
| Fasteners | Two socket head cap screws |
| Fitment | Universal fit |
Vehicle fitment
It is sold as universal fit and is not made for one make, model or year. It is used for truggy and buggy frames.
Measure your tube and frame layout first, then verify your year, model and trim.
Installation notes
The clamps join a support tube across the frame using the two socket head cap screws. Check the screws for tightness after the first few runs, because a loose clamp can shift a load on a rough trail.
What’s included
The interlocking tube clamps with two socket head cap screws.
Not included: the support tube itself, which is a separate part.












