Overview
The Trail Gear Creeper Joint Rebuild Kit, part number 301078-KIT, is a set for rebuilding a creeper joint with polyurethane bushings and hardened steel washers. Confirm fit for your vehicle’s year, model and trim before ordering.
Owners who need replacement bushings and washers for a creeper joint rebuild can use the specifications below to check the materials and identifiers provided.
Key features
- Polyurethane bushings included
- Hardened steel washers included
- Complete set for rebuilding a creeper joint
- Single kit under part number 301078-KIT
Rebuilding a creeper joint
A creeper joint rebuild replaces the bushings and washers that carry movement between the joint’s parts. Polyurethane bushings resist grit and are often chosen for their low friction, while hardened washers hold up against metal-to-metal contact at the wear faces. Before starting, clean the housing and note how the old bushings and washers seated.
Check the bores and pins for scoring before installing new bushings, since a worn bore can wear new parts quickly. Measure the existing parts against the kit to confirm they match before fitting. If a pin or housing is damaged, replacing the bushings alone will not restore the joint’s fit.
- Clean the housing and remove old bushings fully
- Check bores and pins for scoring
- Replace washers that show flat spots or grooves
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301078-KIT |
| UPC | 70000708110 |
| Bushing material | Polyurethane |
| Washer material | Hardened steel |
Vehicle fitment
Confirm the kit suits your creeper joint’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. Check the joint’s size and bushing fit against your application first.
What’s included
The kit includes polyurethane bushings and hardened steel washers.
Not included: Check the kit contents against your build before starting.







